Step 2: Turn off and disconnect the water supply from the refrigerator.
Step 3: Remove all shelves, drawers, baskets, and bins from inside the fridge.
Step 4: Take off the caps on the back of the refrigerator and remove the screws that secure the cover panel.
Step 5: Carefully remove the cover panel and set it aside.
Step 6: Use a screwdriver to disconnect the wires that are connected to the TCA38151706 compressor.
Step 7: Unscrew the mounting bolts that are securing the compressor in place.
Step 8: Carefully remove the old compressor and set aside.
Step 9: Place the new compressor in the same position as the old one and tighten the mounting bolts.
Step 10: Connect the wires back to the new compressor and make sure they are securely connected.
NOTE: This part also requires software update kit: CJT0000002
Step 11: Put the cover panel back in place and secure it with screws.
Step 12: Reassemble the shelves, drawers, baskets, and bins.
Step 13: Turn the power on and reconnect the water supply to the fridge.
Step 14: Wait a few hours for the temperature to get back to normal before loading food into the fridge.
Step 15: Monitor the refrigerator for any unexpected problems.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.