LG Washer Drum Not Spinning? Stator Assembly 4417EA1002H – Fix Motor Failure Fast

A failed stator assembly is the most common cause of an LE error code and complete drum spin failure in LG direct-drive washers. In most LG front-load and top-load direct-drive washers, the stator works with the rotor to generate the magnetic field that spins the drum — when it fails, the motor loses torque, the drum won’t rotate, and the washer throws an LE (motor error) fault and stops the cycle. ⚡ Common failure point in LG direct-drive washers. Part 4417EA1002H is the genuine OEM replacement stator that restores full motor function and drum spin immediately with no modification required.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your washer powers on and the control panel functions normally
• ✔ The washer fills with water and drains correctly
• ✔ The door latch and door lock are functioning properly
• ✔ You have confirmed the rotor and hall sensor are intact (no visible damage)
• ✔ ONLY problem is drum not spinning, motor humming without rotation, or LE error code

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

• LE error code displayed — most common Google search for this failure
• Drum does not spin or rotate on any cycle
• Motor hums or buzzes but drum does not move
• Washer starts, fills, then stops and displays LE fault
• Burning smell from motor area during attempted spin
• Clothes come out soaking wet — spin cycle not completing

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this stator assembly restores full drum spin and clears the LE error immediately.

📦 Part Details

• Part Number: 4417EA1002H
• Type: Direct-Drive Washer Stator Assembly (Motor Stator)
• Replaces: OEM direct-fit stator assembly — supersedes 4417EA1002P (no modification required)
• Brands: LG, Kenmore (LG-built direct-drive models)

⚙️ Installation

Skill Level: Moderate — 30–45 minutes. Disconnect power before beginning. Lay the washer on its back to access the motor — remove the rotor bolt (reverse-thread on some models, turn clockwise to loosen), pull the rotor, unplug the stator wire harness, remove the six stator mounting bolts, and swap the stator. Reinstall in reverse order and torque the rotor bolt to spec (approx. 50–60 Nm) — under-torquing the rotor bolt is the #1 cause of repeat LE errors after repair.

✓ Compatible Models

Confirmed compatible with select LG and Kenmore direct-drive washer models. Contact us to verify your model number before ordering.

💡 Pro Tip

See all parts, cross-references, and model compatibility: 4417EA1002H Part Hub, 4417EA1002P

✓ Model-Specific Repair Pages