Haze or streaks can occur when wiper rubber has deteriorated or hardened. Acura states that hardened blade surfaces can scratch window glass. The supplied catalog lists replacement alternatives for the front-left position on 2010–2013 Acura ZDX applications. Verify the exact year, position, connector, and vehicle configuration before ordering. A new blade is not a guaranteed repair for damaged or contaminated glass.
What should you confirm before buying a part?
The supplied catalog covers 2010, 2011, 2012, and 2013 Acura ZDX applications for the front-left position, with one blade listed per car for that position. This does not confirm passenger-side fitment or applications for other Acura models.
Each listed alternative uses a Hook 9x3 arm connection. The Trico option is cataloged as a 26-inch conventional blade. The ProTune options are cataloged as 26-inch standard and steel-frame silicone blades. Compare the vehicle’s connector with the exact product application before purchase.
Streaks or an uncleared band may be associated with deteriorated rubber, but glass contamination or damage can produce similar results. Inspect the windshield separately; replacing a blade does not repair scratches, chips, or permanent etching.
Acura’s supplied maintenance source specifically identifies the 2011 ZDX and provides model-specific maintenance guidance for that year. Do not extend that source to other model years without applicable documentation. For fitment, use the catalog application for the exact year and position.
Use the exact year, make, model, position, and relevant equipment details when checking fitment. A shared model name does not make every part interchangeable.
Which symptoms need further diagnosis?
Deteriorated wiper rubber can leave streaks or a film across the swept area. Dirty glass, residue, or other blade and windshield conditions may create similar visibility concerns, so a replacement is not a guaranteed diagnosis.
These symptoms can accompany a hardened, damaged, or contaminated blade, but they do not establish that the blade is the only cause. If the pattern continues after fitment and cleaning checks, seek qualified evaluation.
Acura cautions that hardened blade surfaces can scratch window glass. Replacing the blade may help prevent continued contact from a hardened surface, but it will not guarantee repair of existing glass damage.
A blade that moves but cleans poorly is a different symptom from a wiper that does not move. No-movement or abnormal-operation concerns require diagnosis using the exact vehicle procedure rather than assuming ordinary blade wear.
The listed products are catalog alternatives, not a diagnosis or a promise that replacement will resolve every visibility or operating concern.
What does this system do?
A wiper blade’s flexible edge contacts the windshield as the arm moves it across the glass. When the rubber deteriorates or hardens, wiping quality may decline and streaks or missed areas may appear. A replacement blade addresses the blade itself; it does not repair windshield damage or establish the cause of an unrelated operating problem.
What can you check safely first?
Inspect the blade and windshield while the vehicle is safely parked. Do not operate wipers on a dry windshield. Acura’s general wiper guidance advises warming frozen blades with the defogger or heated windshield before operation. Follow the exact vehicle and product instructions, and obtain qualified help if the system or visibility remains unsafe.
Which part numbers are worth checking?
Match one appropriate option to the diagnosed fault and exact vehicle. These may be alternatives for different years or equipment; they are not a list of parts to replace together.
| Part number | Catalog description | Verified catalog years — restrictions below |
|---|---|---|
| 26-1 | Trico Window Wiper Blade 26-1 | 2010, 2011, 2012, 2013 |
| 3500-99899 | ProTune Window Wiper Blade 3500-99899 | 2010, 2011, 2012, 2013 |
| 3510-667963 | ProTune Window Wiper Blade 3510-667963 | 2010, 2011, 2012, 2013 |
What else should be inspected?
A replacement is most relevant when the ZDX wiper moves normally but leaves streaks or an uncleared film. Check the glass separately and verify the Hook 9x3 connector and exact year-position application. If abnormal operation continues, use qualified diagnosis rather than assuming the blade is responsible.
Installation and service precautions
Choose the exact catalog application, then follow the blade manufacturer’s instructions for removal and installation. Support the arm so it cannot fall onto the windshield, confirm the connector is retained, and do not force or modify an incompatible connection. Test only as directed on a wet windshield. Use a qualified technician if safe installation or further diagnosis is uncertain.
Use the manufacturer procedure for the exact vehicle year and equipment. The supplied technical source does not provide a ZDX-specific installation procedure for every listed year.
Use a qualified technician when inspection or repair exceeds safe owner-level work. Follow applicable safety instructions and do not bypass safety devices.
Which vehicle applications are verified?
The catalog records below belong to each individual part number. Notes, engine, trim and equipment restrictions apply only to the associated entry. Confirm the VIN privately with XPart Supply where the application is uncertain.
26-1 — Acura ZDX catalog applications
2010, 2011, 2012, 2013 Acura ZDX — Position: Front Left
Catalog note: Conventional Blade Option, this is a 26'' 9 x 3 Hook Conventional Wiper Blade, oe: 76620-TE0-A01; 76620TE0A01
3500-99899 — Acura ZDX catalog applications
2010, 2011, 2012, 2013 Acura ZDX — Position: Front Left
Catalog note: Arm Connector: Hook 9x3, Original (OEM): Hybrid
3510-667963 — Acura ZDX catalog applications
2010, 2011, 2012, 2013 Acura ZDX — Position: Front Left
Catalog note: Arm Connector: Hook 9x3, Original (OEM): Hybrid
A listing here does not override the current product-page fitment or a manufacturer supersession.
Ask XPart Supply to confirm fitmentPro Tip
Replace a blade when its wiping performance is visibly poor and the application is verified. After installation, check the swept area only under safe, wet conditions. Remaining marks may require separate windshield evaluation.
Frequently Asked Questions
Which listed blade styles are cataloged for a 2010–2013 Acura ZDX?
The catalog lists a Trico 26-inch conventional blade, a ProTune 26-inch standard blade, and a ProTune 26-inch steel-frame silicone blade. All three are shown for the front-left position with a Hook 9x3 connection across the supplied 2010–2013 applications. Confirm the exact year and position before ordering.
Will a new wiper remove windshield scratches or etched haze?
Not necessarily. A replacement may improve wiping when deteriorated rubber is involved, but it does not repair scratched, chipped, or permanently etched glass. Acura warns that hardened blade surfaces can scratch window glass.
Is poor visibility always caused by the wiper blade?
No. Deteriorated rubber is one supported possibility, while glass condition and other vehicle concerns may also require evaluation. Poor cleaning and no wiper movement should not be treated as the same issue. Seek qualified diagnosis when the cause is unclear.
Can I use the wipers on a dry or frozen windshield?
Avoid operating wipers on a dry windshield. Acura’s general guidance advises warming frozen blades with the defogger or heated windshield before operation. Follow the exact vehicle instructions and do not force blades across ice.
What should I do if the new blade still skips?
Recheck the exact application, Hook 9x3 connector, blade seating, and windshield condition. If skipping remains, have the blade, arm, and windshield evaluated by a qualified technician rather than assuming another replacement will solve it.
Related parts and vehicle guide
Technical references
Manufacturer and technical reference material informed this guide. Public discussion activity is used only to identify questions; individual reports are not proof of the cause on your vehicle.
Acura Maintenance Schedules — 2011 ZDX
Read the technical sourceAcura Wipers and Washers guidance
Read the technical source