Brada Dryer Parts Canada: Samsung-Built Dryer Replacement Parts

If you're searching for Brada dryer parts in Canada, you may have already noticed that finding them isn't straightforward. Brada is a Canadian appliance brand that sold dryers under its own name — but many of those dryers were manufactured by Samsung. That means the replacement parts you need are often Samsung dryer parts, not Brada-branded components.

Important: Always confirm your model number before ordering. Not every Brada appliance is Samsung-built, and part compatibility must be verified by model. Known Samsung-built Brada dryer models include the BED70B/XAC and BED70W/XAC — if your model number matches, the Samsung part numbers below are your starting point.

Common Brada Dryer Parts That Cross Over to Samsung Dryer Parts

The following Samsung part numbers are the most commonly needed replacement parts for Brada dryers built by Samsung. These cover the highest-failure components across the BED70 series and related models.

🔧 Drive Belt

6602-001655 — Brada dryer belt / Samsung dryer belt. The drum drive belt is one of the most common dryer failures. When it snaps, the drum stops turning but the motor keeps running. If your Brada dryer runs but the drum doesn't spin, this is the first part to check.

🔥 Heating Element

DC47-00019A — Brada dryer heating element / Samsung dryer heating element. No heat or insufficient heat is the #1 dryer complaint. The heating element burns out over time, especially in lint-restricted machines. Also see DC93-00154A (heating element assembly) and DC47-00015A (thermostat) for a complete thermal system service.

🌡️ Thermal Fuse & Thermostats

• DC96-00887A — Dryer thermal fuse. Blows when the dryer overheats, causing a complete no-heat condition. Non-resettable — must be replaced.
• DC96-00887C — Thermal cut-off fuse and bracket assembly.
• DC47-00016A — Dryer thermal cut-off thermostat.
• DC47-00018A — Dryer high-limit thermostat. Protects the element from overheating.
• DC32-00007A — Dryer thermistor. Monitors drum temperature and signals the control board.

⚙️ Drum Support & Idler Pulley

• DC93-00634A — Dryer idler pulley assembly. Keeps tension on the drive belt. A worn idler pulley causes squealing, thumping, or belt slippage.
• DC97-16782A — Dryer drum support roller. Supports the rear of the drum. Worn rollers cause loud rumbling or squeaking during operation.
• DC61-02627A — Idler pulley / plate sensor listing.

🚪 Door Switch

DC64-00828B — Dryer door switch. If the dryer won't start at all but has power, a failed door switch is a common cause. The control board won't allow operation unless it detects a closed door.

🧹 Lint Filter & Lint Screen

• DC61-02595A — Dryer lint case filter. The lint housing that holds the filter in place.
• DC97-16742A — Dryer lint screen. The removable filter itself. A clogged or damaged lint screen restricts airflow and causes thermal fuse failures.

💧 Moisture Sensor

DC61-02634A — Dryer moisture sensor. Detects when clothes are dry and signals the control board to end the cycle. A failed sensor causes the dryer to run too long or stop too early.

🖥️ Main Control Board

DC92-02388A — Dryer main control board. Controls all dryer functions. Symptoms of a failed board include unresponsive controls, error codes, or the dryer not starting despite power being present. Also see DC92-01729W for PCB main control board variants.

🎛️ Control Knob

DC97-16931B — Dryer control knob. Cosmetic and functional — a cracked or stripped knob prevents cycle selection.

⚡ Drive Motor

DC31-00055G — Dryer drive motor. The motor that turns the drum and powers the blower. A failed motor causes the dryer to hum but not start, or to stop mid-cycle. Also see DC31-00055H for updated motor variants.

Additional Brada / Samsung Dryer Parts

The following part numbers cover additional components across the Brada / Samsung dryer platform. Use these for broader repairs or when servicing multiple components at once:

DC61-02610A · DC63-01140A · DC62-00344A · DC97-21429B · 6009-001522 · DC61-03048A · DC97-07618A · DC97-17965A

How to Find the Right Brada Dryer Part

1. Locate your model number — it's on a sticker inside the dryer door frame or on the back panel. For Brada dryers, look for model numbers like BED70B/XAC or BED70W/XAC.
2. Confirm the Samsung cross-reference — once you have the model number, the Samsung part number can be confirmed against the parts diagram for that specific model.
3. Order the OEM part — genuine Samsung OEM parts ensure correct fit and full service life. Aftermarket substitutes may not meet the original thermal or electrical specifications.

Not sure if your Brada dryer uses Samsung parts? Send us your model number and we'll confirm compatibility before you order.

Full Part Number Reference List

6602-001655 · DC47-00019A · DC93-00634A · DC97-16782A · DC96-00887A · DC96-00887C · DC47-00016A · DC47-00018A · DC32-00007A · DC64-00828B · DC61-02595A · DC97-16742A · DC92-02388A · DC61-02627A · DC61-02634A · DC97-16931B · DC93-00154A · DC47-00015A · DC92-01729W · DC31-00055G · DC61-02610A · DC63-01140A · DC62-00344A · DC97-21429B · 6009-001522 · DC61-03048A · DC97-07618A · DC97-17965A · DC31-00055H

XPart Supply ships genuine OEM appliance parts across Canada. Contact us to verify your model number before ordering.