GE Canadian Washer Poor Wash Action or Dirty Clothes? Here's How to Fix It

GE Canadian Washer Not Washing Properly?

OEM Parts for GUD-Series Washers | Canadian Business Since 1996 | Fast Canada-Wide Shipping

✓ Clothes come out still dirty✓ Weak or no wash action✓ Clothes barely move in drum✓ Detergent residue on clothes✓ Inefficient wash cycles✓ Worn or damaged tub assembly
🇨🇦 Canadian Business Since 1996⭐ 30 Years of Expertise🚚 Fast Canada-Wide Shipping✓ Guaranteed Fit

Top Causes: GE Canadian Washer Poor Wash Action

1. Worn or Damaged Subwasher Tub Kit

The WW03A00270 tub kit — nicknamed “The Egg” — is the core wash assembly in GE GUD-series Canadian washers. When the tub kit wears out or cracks, water movement is compromised and clothes sit in water without proper agitation, coming out dirty or with detergent residue.

Symptoms: Clothes barely move, come out dirty, weak wash action, visible wear or damage to tub assembly.

→ Shop WW03A00270 Subwasher Tub Kit

2. Missing or Damaged Wash Plate (WW03A00244)

The wash plate works in tandem with the tub kit to create the oscillating wash action. If the wash plate is cracked, missing, or not properly seated, wash performance will be severely reduced even if the tub kit is in good condition. Note: the wash plate is sold separately from the tub kit.

Symptoms: Tub kit appears intact but clothes still come out dirty, wash action is weak or one-directional.

→ Shop WW03A00244 Wash Plate

3. Overloading the Washer

GE GUD-series washers rely on water movement to clean clothes. Overloading prevents clothes from tumbling freely, resulting in poor wash performance even when all parts are working correctly.

Symptoms: Centre of load comes out dirtier than edges, performance improves with smaller loads.

→ GE Washer Leaving Clothes Dirty – Full Guide

4. Clogged Water Inlet Valve

If the washer isn’t filling with enough water, clothes won’t be fully submerged and wash action will be ineffective. A partially blocked inlet valve restricts water flow into the drum.

Symptoms: Low water level in drum, clothes on top barely wet, longer fill times than normal.

→ Shop GE Washer Water Inlet Valves

5. Detergent Dispenser Blockage

A clogged dispenser prevents detergent from entering the wash water at the right time, leaving clothes washed in plain water with no cleaning action.

Symptoms: Detergent residue in dispenser after cycle, clothes smell unwashed, no suds visible during wash.

→ Shop GE Washer Dispenser Parts

How to Diagnose the Problem

  1. Check the tub kit visually — open the lid and inspect the tub assembly for cracks, wear, or damage. The wash plate should be firmly seated and intact.
  2. Watch mid-cycle — open the lid during the wash cycle. Clothes should be actively moving through the water. If stationary, the tub kit or wash plate needs replacement.
  3. Check water level — the drum should fill enough to cover the clothes. Low water points to an inlet valve issue.
  4. Test with a small load — if a small load washes fine but a full load doesn’t, overloading is the culprit.
  5. Inspect the detergent dispenser — clean thoroughly and run an empty cycle to check water flow through the dispenser.

Frequently Asked Questions

What is the WW03A00270 tub kit and why does it need replacing?

The WW03A00270 — also called “The Egg” — is the main wash tub assembly in GE GUD-series Canadian washers. Over time it can crack or wear out, reducing wash effectiveness. Replacing it restores proper water movement and cleaning performance.

Does the WW03A00270 tub kit include the wash plate?

No — the wash plate (WW03A00244) is sold separately and is not included with the tub kit. Both parts are required for a complete repair. Make sure to order both.

What GE washer models does WW03A00270 fit?

WW03A00270 fits GE GUD-series Canadian-market top-load washers including GUD27ESMM1WW, GUD27ESMM0WW, GUD27ESMMWW, GUD27GSSMWW, GUD37ESMMDG, GUD27EEMNWW, and GUD37EEMNDG.

Do you carry OEM GE washer parts for Canadian models?

Yes — XPart Supply specializes in OEM and aftermarket parts for Canadian-market appliances, including GUD-series GE washers. We’ve been supplying parts across Canada since 1996.

How fast can I get parts shipped to me in Canada?

Most in-stock orders ship within 1 business day from our Canadian warehouse. Delivery is typically 2–5 business days across most of Canada. Note: oversized/freight items may have longer delivery windows.