WD21X22830
Detects food particles in dishwasher water to monitor water clarity.
GE Dishwasher Model CDT706P2M5S1 Parts
MODEL PARTS & REPAIR GUIDE
GE CDT706P2M5S1 Dishwasher Parts & Repair Guide
Find verified XPart replacement parts for GE Dishwasher model CDT706P2M5S1. Every product link below is matched to this exact model and checked against the live XPart catalog.
🇨🇦 Canadian Business Since 1996
⭐ 30 Years of Appliance Experience
🚚 Fast Shipping Across North America
✓ Wrong Part Protection
MODEL
CDT706P2M5S1GE Dishwasher
12 verified XPart product pages linked for this exact model.
Need help choosing the right part?
Not sure which part you need? Compare the part number on your original component and send XPart Supply your full model number CDT706P2M5S1 and symptoms for fit help.
Find a Part by Symptom
Symptoms are a starting point only and can have more than one cause.
Longer-than-normal wash times.Longer-than-normal wash times when the sensor does not properly detect water clarity.Dishwasher indicates the door is open or will not start when the door is closed.Door will not stay closedDishwasher will not start or runUpper rack is loose or does not remain properly supported.Upper rack instabilityUpper rack difficulty remaining aligned on its railLower rack is damaged or does not slide smoothly.Rust, corrosion, cracked coating, or broken rack wiresBent or missing tines causing dishes to tip or remain unsecuredUpper dishwasher rack does not slide smoothly.Upper rack binds or slides unevenly.Upper rack support rail is damaged or broken.
Replacement Parts for GE CDT706P2M5S1
Every product link below is checked against XPart's verified model-compatibility data and the live Shopify product page.
Controls & Electronics (2)
WD21X32163
Door & Hardware (2)
WD21X10490
Secures the dishwasher door and activates the door-closed electrical switches required for operation.
Racks & Storage (3)
WD12X20109
Secures and supports the adjustable upper dishwasher rack.
WD28X34743
Supports and organizes dishes, pots, and cookware on the bottom level of compatible GE dishwashers while allowing the loaded rack to roll in and out on its tracks.
WD30X20110
Supports and guides smooth movement of the dishwasher upper rack.
Replacement Parts (4)
WD01X22514
Secures dishwasher components where this specified 10-32 screw is used.
WD21X23559
Transfers electrical signals between two points in the dishwasher’s control circuit, connecting internal electrical components.
WD22X20688
Supports and retains the dishwasher’s upper spray impeller/spinner while allowing it to rotate and receive water for upper-rack cleaning.
WD22X20689
Fits inside the WD22X20688 top-spray impeller hub and propels wash water through the upper spray system to clean the upper dishwasher rack.
Water Inlet (1)
WD15X26140
Supplies water to the dishwasher at the proper rate.
GE CDT706P2M5S1 Compatibility
This guide is specifically for GE Dishwasher model CDT706P2M5S1. Only XPart product pages backed by verified model compatibility are linked here. Always compare the complete appliance model number and replacement part number before ordering.
Before You Order
- Confirm the complete appliance model number from the model/serial label.
- Compare the original component part number when it is visible.
- Review replacement or supersession information on the linked XPart product page.
- If diagnosis is uncertain, contact XPart Supply before ordering.
Frequently Asked Questions
Which parts fit CDT706P2M5S1?
The linked parts on this page are matched to GE Dishwasher model CDT706P2M5S1 using XPart model-compatibility records.
How do I confirm the correct replacement?
Match the complete appliance model number and the original component part number, then review replacement details on the linked XPart product page.
What if I am not sure which part failed?
Use symptom information as a starting point and contact XPart Supply with the full model number and observed symptoms before ordering if diagnosis is uncertain.
- Choosing a selection results in a full page refresh.
