Bosch 00753351 Dishwasher Main Wash Pump – Replaces 746094, 753351 | Fits SHE, SHP, SHX, SHV Series

Is This the Part You Need?

The main wash pump is the heart of your Bosch dishwasher’s cleaning system — it pressurizes water from the sump and drives it through the spray arms at high pressure during every wash cycle. When the motor burns out, the impeller is damaged by glass shards or debris, or the pump housing seals fail, the dishwasher runs through its cycle but delivers no cleaning power: spray arms stop spinning, dishes come out dirty, and you may hear humming or grinding with no water movement. The 00753351 is the genuine OEM Bosch replacement (superseding 746094) that restores full wash pressure as a direct drop-in fit — no modifications required.

Symptoms This Part Fixes

• Dishwasher runs but dishes come out dirty — no spray arm action
• No water spraying from upper or lower spray arms
• Loud humming, grinding, or buzzing noise during the wash cycle
• Dishwasher fills with water but nothing gets clean
• Error codes related to wash motor or circulation pump (E-codes)
• Spray arms spin freely by hand but don’t rotate during cycle
• Water leaking from the pump area at the base of the tub

Part Details

• Part Number: 00753351
• Replaces (Cross-Reference): 746094, 746094.00, 753351
• Note: 00753351 is the current OEM number superseding 746094 — same pump, updated part number
• Type: Main Wash Pump (Circulation Pump Assembly)
• Includes: Motor + impeller housing as a complete assembly
• Brand: Bosch / Siemens (OEM)
• Compatible Series: SHE, SHP, SHX, SHV (Bosch), SGE (Siemens), DWHD (Thermador)
• Installation: Direct OEM drop-in — no modifications required
• HS Code: 850990
• Available Conditions: New OEM, Used OEM

Installation Notes

Skill Level: Intermediate — requires removing the lower spray arm, filter assembly, and sump cover to access the pump (45–60 minutes).

• Disconnect power at the circuit breaker before starting
• Remove the lower spray arm and filter assembly to access the sump
• Disconnect the wiring harness and water inlet/outlet hoses from the existing pump
• Remove the 3 mounting screws, lift the old pump out, and lower the new 00753351 into position
• Secure mounting screws — refer to your model’s service manual for torque specs if available; do not overtighten into the plastic sump housing
• Reconnect hoses and wiring harness, reinstall the filter and spray arm, restore power, and run a short test cycle to confirm normal wash pressure

Compatible Models

Fits Bosch SHE, SHP, SHX, SHV series, Siemens SGE series, and Thermador DWHD series dishwashers. Model-specific repair pages:

Don’t see your model? Contact us to confirm compatibility before ordering.