Bosch Microwave Turntable Not Spinning or Food Heating Unevenly? Turntable 00795460 – Fix Rotation Fast

When your Bosch microwave turntable stops spinning, cracks, or causes uneven heating, the turntable tray is the first component to replace. In most Bosch-built microwaves, the glass turntable rotates on a drive coupler and ring to ensure even microwave energy distribution throughout the food — when the tray is cracked, chipped, or the drive system fails to rotate it, food heats unevenly with cold spots and hot edges. ⚡ Common failure point in Bosch-built over-the-range and countertop microwaves. Part 00795460 is the genuine OEM replacement turntable that restores proper rotation and even heating performance.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your microwave powers on and heats normally — only the turntable is the issue
• ✔ The turntable tray is cracked, chipped, or missing
• ✔ The turntable drive coupler and ring are intact and undamaged
• ✔ The turntable motor has been confirmed working (tray rotates when driven manually)
• ✔ ONLY problem is a damaged tray, tray not sitting level, or uneven heating due to tray condition

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Turntable not spinning — tray sits still during microwave operation
• Food heating unevenly — cold spots in centre, overheated edges
• Turntable tray cracked, chipped, or broken
• Tray wobbles or doesn't sit flat on the ring support
• Grinding or scraping noise during turntable rotation
• Tray missing entirely — lost or damaged beyond use

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this turntable restores even heating and quiet operation immediately.

📦 Part Details

• Part Number: 00795460
• Type: Microwave Glass Turntable Tray
• Replaces: OEM direct-fit turntable for compatible Bosch-platform microwave models (no modification required)
• Brands: Bosch, Thermador, Gaggenau

⚙️ Installation

Skill Level: Easy — Under 5 minutes. No tools required and no power disconnect needed for tray replacement. Lift the old tray straight up off the drive coupler and ring support, set it aside, and lower the new 00795460 tray onto the ring support ensuring the centre hub seats correctly on the drive coupler. Restore power and run a 30-second test cycle to confirm smooth rotation.

✓ Compatible Models

Confirmed compatible with select Bosch, Thermador, and Gaggenau microwave models. Contact us to verify your model number before ordering.

🔗 Model Hub Pages

No model-specific hub pages linked yet — contact us with your model number and we'll point you to the right parts breakdown.

💡 Pro Tip