OVEN NOT HEATING
Oven Relay 07.08.000010-000-A, Fixes Oven Not Heating or Heating Inconsistently

The 07.08.000010-000-A Oven Relay is designed to control the switching of oven heating elements, enabling precise temperature regulation and safe operation. It is the OEM replacement relay when the oven fails to heat, heats inconsistently, or trips on thermal overload due to relay failure.

Is This the Right Part?

Confirm the complete model number before ordering. Similar relays may differ in coil voltage, contact rating, terminal configuration, or mounting footprint.

Common Symptoms

• Oven does not heat at all — bake or broil element receives no power
• Oven heats inconsistently or cycles off prematurely
• Oven trips thermal protection repeatedly during a heating cycle
• Control board sends signal but heating element does not activate

Check Before Replacing

• Confirm the heating element itself is not open or burned — test with a multimeter
• Verify the control board is sending the correct signal to the relay coil
• Inspect relay terminals and wiring harness for corrosion, arcing, or loose connections
• Check for error codes on the control board that may indicate a relay fault

Part Details

Installation Notes

1. Disconnect power to the appliance at the breaker before beginning.
2. Photograph wiring connections and relay orientation before removal.
3. Compare the new relay with the original — verify terminal layout and coil voltage match.
4. Inspect the wiring harness and connector terminals for heat damage or corrosion.
5. Restore power and test the oven through a full heating cycle, checking for error codes.

Use a qualified technician when diagnosis or installation is outside your experience. Commercial oven repairs should be performed by a licensed technician.

Verified Compatible Models

Confirm your complete model number before ordering. Contact us to verify fitment if your model is not listed.

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering.