Dishwasher Lower Rack Collapsing or Items Falling Through? Rack Fence 140054938026 – Fix Lower Rack Retention Fast
A dishwasher lower rack where items tip over, fall through the sides, or the fence rail has snapped off is one of the most common usability failures in Electrolux and AEG dishwashers. In most Electrolux, AEG, and Frigidaire dishwashers, the lower rack fence is a plastic retaining rail that runs along the front or side of the lower basket, keeping dishes upright and preventing items from falling into the spray arm path. When it cracks, snaps, or loses its mounting clips, dishes shift during the wash cycle, blocking spray coverage and causing poor wash results. ⚡ A common wear-and-tear failure in Electrolux-platform dishwashers after 3–5 years of use. Part 140054938026 is the genuine OEM lower rack fence with clips that restores full rack retention and gets your dishwasher loading correctly again.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your dishwasher runs normally — fills, washes, and drains without error
- ✔ The lower rack rolls in and out correctly on its wheels/glides
- ✔ The spray arm beneath the lower rack is intact and spins freely
- ✔ ONLY problem is the fence rail is cracked, broken, or missing its mounting clips
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Lower rack fence rail cracked, snapped, or completely broken off
- Dishes tipping over or falling through the side of the lower rack during wash
- Mounting clips broken — fence no longer stays attached to the rack frame
- Items blocking the lower spray arm due to shifted rack contents
- Poor wash results on the lower rack — dishes not getting clean
- Fence rattling or moving loose during the wash cycle
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this rack fence restores normal loading and wash performance immediately.
📦 Part Details
- Part Number: 140054938026
- Type: Dishwasher Lower Rack Fence — Retaining Rail with Mounting Clips
- Includes: Fence rail + mounting clips (complete assembly)
- Brands: Electrolux, AEG, Frigidaire
While the lower rack is out, inspect the rack wheels and axles for wear or cracking — worn wheels cause the rack to sit unevenly and stress the fence rail, leading to repeat failures. Replacing worn rack rollers at the same time prevents the new fence from breaking prematurely.
⚙️ Installation
Skill Level: Easy — 5–10 minutes. No tools required. Pull the lower rack fully out of the dishwasher. Unclip the old fence rail from the rack frame by pressing the mounting clips inward and lifting free. Align the new 140054938026 fence along the rack rail, press the clips firmly into the rack frame until they snap into place, and confirm the fence is secure along its full length. Slide the rack back in and test loading before running a cycle.
✓ Compatible Models
Confirmed compatible with select Electrolux, AEG, and Frigidaire dishwasher models. Contact us to verify your model number before ordering.
💡 Pro Tip
The most common reason a replacement fence fails early is clips that weren't fully seated at installation. After snapping the fence in, tug it firmly along its full length — it should not flex or lift at any point. If a clip feels loose, remove and reseat it before running a wash cycle. A partially seated clip will work free under vibration within a few cycles.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
