Dishwasher Lower Rack 1758971100 – Fix Broken Tines, Collapsed Rack, or Dishes Not Sitting Securely | OEM
The lower rack holds your plates, pots, pans, and large items during every wash cycle. When tines snap off, the rack frame bends, the wheels crack and stop rolling, or the vinyl coating rusts through and exposes bare wire, dishes tip over mid-cycle, block the spray arm, and come out dirty or chipped. The 1758971100 OEM Dishwasher Lower Rack is the factory-specified replacement that restores a stable, fully functional loading surface and allows the spray arm to rotate without obstruction.
Is This the Right Part?
Confirm the complete model number before ordering. Similar parts may use different connectors, dimensions, hose positions, electrical ratings, or mounting points.
- Tines (prongs) broken, bent, or missing — dishes won’t stand upright
- Rack frame bent or collapsed — won’t slide in and out smoothly
- Rack wheels cracked, broken, or missing — rack drags on the tub floor
- Vinyl coating rusted through — bare wire scratching dishes or glassware
- Dishes tipping over mid-cycle and blocking the lower spray arm
- Lower spray arm hitting the rack and not rotating freely
- Dishes in the lower rack coming out dirty due to spray arm obstruction
- OEM Part Number: 1758971100
- Brand: OEM replacement
- Component: Dishwasher lower dish rack (complete assembly)
- Genuine OEM: Yes — factory-specified replacement
- Options: New or Used (inspected for tine integrity and wheel function)
- Skill Level: Beginner — no tools required
- Estimated Time: 2–5 minutes
- Key Steps: Open dishwasher door fully → Pull old lower rack straight out until it clears the wheel axles → Lift old rack out and set aside → Align new rack wheels with the axle rails on both sides of the tub → Slide new rack in until wheels seat fully on the axles → Test by rolling rack in and out smoothly → Confirm lower spray arm rotates freely with rack in place
- Safety: No power disconnect required for rack replacement alone. If inspecting the spray arm or cleaning the tub, disconnect power as a precaution.
- Canadian Business Since 1996 — 30 Years of Appliance Parts Expertise
- Guaranteed Fit — OEM parts matched to your exact model
- Fast Canada-Wide Shipping
- Trusted by DIYers and Appliance Technicians Across Canada
- Expert support to confirm compatibility before you order
A collapsed or heavily damaged lower rack almost always means the lower spray arm has been hit repeatedly by tipping dishes or broken tines. Before installing the new rack, remove the lower spray arm and spin it by hand — it should rotate freely with no wobble or resistance. Check the spray arm holes for clogging from broken tine fragments or food debris. Also inspect the rack wheel axles on the tub walls — if the old rack’s wheels broke off and the axle clips are damaged, the new rack won’t roll smoothly. Replacing damaged axle clips at the same time prevents the new rack from dragging and wearing prematurely.
Part Details
Use a qualified technician when diagnosis or installation is outside your experience. Gas parts should be installed by a licensed technician.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
