279834 Dryer Gas Valve Solenoid Coil Kit, 2 Pieces
279834 Dryer Gas Valve Solenoid Coil Kit, 2 Pieces
279834 Dryer Gas Valve Solenoid Coil Kit, 2 Pieces
279834 Dryer Gas Valve Solenoid Coil Kit, 2 Pieces
279834 Dryer Gas Valve Solenoid Coil Kit, 2 Pieces
279834 Dryer Gas Valve Solenoid Coil Kit, 2 Pieces
279834 Dryer Gas Valve Solenoid Coil Kit, 2 Pieces
279834 Dryer Gas Valve Solenoid Coil Kit, 2 Pieces

Whirlpool Dryer Gas Valve Solenoid Coil Kit 279834

XPart Number XP10005225
$19.99
Out of stock
Buying Options: Certified Pre-Owned

Product variant with selected options does not exist!

Frequently Bought Together
Equivalent PartsCross-reference listings may have additional stockCheck Stock →
DRYER IGNITES INITIALLY BUT STOPS HEATING OR FAILS TO REIGNITE

Whirlpool Dryer Gas Valve Solenoid Coil Kit 279834, Fixes Dryer ignites initially but stops heating or fails to reignite

Genuine Whirlpool M-series dryer gas burner valve solenoid coil set containing one two-terminal coil and one three-terminal boost/hold coil.

Part 279834Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part Number279834
ManufacturerWhirlpool
Appliance TypeDryer
Part TypeDryer Gas Valve Solenoid Coil Kit

✅ Cross Reference Information

Current Part Number279834

Common Symptoms

  • No heat or insufficient heat
  • Dryer heats intermittently
  • Dryer takes too long to dry
  • Igniter glows but the burner does not ignite
  • Burner flame shuts off and does not return during the cycle

Check Before Replacing

  • Observe the burner through the inspection area: if the igniter glows and then shuts off without gas ignition, the solenoid coils may be defective.
  • With power disconnected, check the coils for electrical continuity using a multimeter; continuity testing does not by itself confirm complete coil operation.
  • Confirm that the original dryer uses the matching two-coil M-series gas-valve arrangement before ordering.

Pro Tip

Replace both coils as a set because both the two-terminal and three-terminal coils must operate for the gas valve to open correctly.

Part Details

Part Number279834
Part TypeDryer Gas Valve Solenoid Coil Kit
ManufacturerWhirlpool
Appliance TypeDryer
Primary FunctionOpens the dryer gas valve so gas can flow to the burner after the igniter reaches operating temperature.

Installation Notes

  • Disconnect electrical power before servicing the dryer.
  • Shut off the gas supply before working on the gas valve area.
  • Verify the complete appliance model number and compare the original coil configuration before installation.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.

What Customers Say

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps