Frigidaire Refrigerator door handle set, black (2 handles) 5304506471, Replaces 242059503, 242059506, 5304486361, 5304504509, 5304504510, 5304510039, 5304510041

OEM black refrigerator door-handle set containing two handles. Screws are ordered separately. Handles are approximately 16-3/4 inches long.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Handle broken at the top or mounting area
• Handle pulls away from or shifts on the door
• Handle is missing or cosmetically damaged
• Door is difficult to open because the handle cannot be gripped securely

Check Before Replacing

• Visually inspect both handles for cracks, breaks, separation, or missing sections.
• Gently check whether either handle moves independently of the door; do not force it if the mounting area appears damaged.
• Verify that the replacement kit’s black finish, two-handle configuration, approximate length, and mounting style match the existing handles.
• Inspect the visible mounting points and screw locations for obvious damage or missing hardware. The securing screws are ordered separately.
• If the handle is intact but the door does not close or seal correctly, inspect the door alignment and gasket separately rather than assuming the handle is the cause.

Pro Tip

Part Details

Key Features

• Frigidaire OEM black refrigerator door-handle set
• Includes two handles for refrigerator and freezer compartments
• Handles are approximately 16-3/4 to 17 inches long
• Handles slide onto the door mounting points and are secured with screws
• Securing screws are not included with the handle set

Installation Notes

• Disconnect power before beginning the repair if required by the appliance’s installation or service instructions.
• Remove the securing screw(s) and release the existing handle from its mounting point without forcing it.
• Seat the replacement handle on the door mounting hardware in the same orientation as the original, ensuring the retaining lip or locking feature is properly engaged.
• Secure the handle using the correct separately ordered screw hardware; do not substitute hardware that does not fit the original mounting point.
• After installation, check that the handle is firmly seated and does not shift when lightly tested before returning the appliance to normal use.

Verified Compatible Models

CFTR1826LM0, CFTR1826LM1, CFTR1826LM2, CFTR1826LM3, CFTR1826LM4, CFTR1826LM5, CFTR1826LM6, CFTR1826LM7, CFTR1826LM8, CFTR1826LM9, CFTR1826LMA, CFTR1826LMB, CFTR1826LMC, CFTR1826LMD, CFTR1826LME

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.