Frigidaire Washer Dispenser Housing Assembly 5304506505, Replaces 5304505266

The Frigidaire 5304506505 Washer Dispenser Housing Assembly holds and routes detergent, bleach, and fabric softener into the wash drum at the correct point in the cycle. It replaces discontinued OEM part number 5304505266 when fitment is confirmed by the appliance model number. A cracked, broken, or clogged housing prevents proper dispensing and can cause residue buildup or detergent left in the drawer after a cycle.

Is This the Right Part?

Confirm the complete model number before ordering. Similar dispenser housings may differ in compartment layout, hose connection positions, or mounting tab configuration.

Common Symptoms

• Detergent or fabric softener not dispensing during the wash cycle
• Detergent remaining in the dispenser drawer after a full cycle
• Water leaking from the dispenser drawer area
• Visible cracks, breaks, or warping on the dispenser housing

Check Before Replacing

• Clean the dispenser drawer and housing thoroughly — clogged siphon caps or blocked ports mimic housing failure
• Inspect the dispenser inlet hose for kinks, blockages, or disconnection
• Verify water pressure is adequate — low pressure prevents proper flushing of the dispenser
• Check the dispenser actuator or solenoid if the housing appears undamaged but dispensing still fails

Part Details

Installation Notes

1. Disconnect power and shut off water supply before beginning.
2. Photograph the dispenser hose connections and housing mounting position before removal.
3. Compare the replacement housing with the original before installation.
4. Inspect nearby hoses, clamps, and seals for wear or damage.
5. Restore power and run a rinse cycle — check for leaks and confirm dispensing is functioning correctly.

Use a qualified appliance technician when diagnosis or installation is outside your experience.

Verified Compatible Models

No verified model numbers on file. Please contact us with your full model number (including suffixes and revision digits) to confirm fitment before ordering.

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering.