Menu
Standing water at the bottom of your dishwasher after a cycle is a clear sign the drain pump has failed. In most Frigidaire, Electrolux, and Kenmore dishwashers, this is caused by a failed drain pump motor. When it fails, dirty water cannot be expelled at the end of the wash cycle, leaving dishes sitting in contaminated water and preventing the next cycle from starting properly. ⚡ Common failure point in Frigidaire-built dishwashers. Part 5304524920 is the genuine OEM replacement that restores full drainage and gets your dishwasher running normally again.
This is the correct fix if ALL of the following are true:
Not sure? Send us your model number — we'll confirm before you order.
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this drain pump restores normal drainage immediately.
Skill Level: Moderate — 45–60 minutes. Disconnect power and turn off the water supply before servicing. Remove the lower spray arm and filter assembly to access the pump housing, disconnect the wiring harness and drain hose, then swap in the new pump and reassemble in reverse order. Run a short cycle to confirm drainage before closing up.
Confirmed compatible with Frigidaire FGHD2455LB0, FGHD2472PF0, FGHD2491LB0, Electrolux EIDW5705PB0A, EIDW5705PS0A, EIDW5705PW0A, Kenmore 58715412100A, 58715413100A, 58715423100A, and additional Frigidaire-platform models. Contact us to verify your model number before ordering.
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.