Hoover Flair Losing Suction or Blowing Dusty Air? Primary Outlet Filter 59136055 – Fix Filtration Failure Fast
A Hoover Flair stick vacuum that loses suction, smells musty, or exhausts dusty air almost always has a clogged or failed primary outlet filter. In most Hoover Flair bagless vacuums, the primary outlet filter is the last line of filtration before air exits the machine — when it becomes clogged or damaged, suction drops sharply and fine dust bypasses the filter and re-enters the room. When it fails, the motor works harder to compensate, shortening its lifespan. ⚡ The most commonly neglected maintenance item on Hoover Flair vacuums. Part 59136055 is the genuine OEM replacement filter that restores full suction and clean exhaust air immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your vacuum is a Hoover Flair bagless stick model (S2200, S2201, or S2220)
- ✔ Suction has noticeably decreased despite the dustbin being empty
- ✔ The dustbin and pre-motor filter have been cleaned or replaced and suction is still weak
- ✔ Exhaust air smells dusty or musty during operation
- ✔ ONLY problem is reduced suction or dirty exhaust — not a blockage in the hose or brush roll
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- Vacuum losing suction — noticeably weaker pickup despite empty dustbin
- Dusty or musty smell from the exhaust during use
- Fine dust visible in the air after vacuuming
- Vacuum motor sounds strained or louder than normal
- Filter visibly grey, compressed, or damaged when inspected
- Suction doesn’t improve after cleaning the pre-motor filter
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing the primary outlet filter restores full suction and clean exhaust immediately.
📦 Part Details
- Part Number: 59136055
- Type: Primary Outlet / Exhaust Filter
- Dimensions: 4-3/8” width × 4-1/8” height
- Replaces: OEM direct-fit Hoover Flair outlet filter (no modification required)
- Brands: Hoover
- Package: Contains one filter
⚙️ Installation
Skill Level: Easy — 5 min. Unplug the vacuum before servicing. Open the filter access cover on the Flair’s body, remove the old outlet filter, and slide the new 59136055 filter into place — it seats with no tools required. Ensure the filter is fully seated and the cover clicks closed before operating the vacuum. Run a quick test pass to confirm suction is restored.
💡 Pro Tip
The Hoover Flair uses both a pre-motor filter and this primary outlet filter — if one is clogged enough to cause symptoms, the other is likely near end of life too. Replacing both during the same service keeps the vacuum performing at full capacity and avoids a second order within weeks. Check Hoover’s recommended replacement interval: typically every 6–12 months under regular use.
Related repair guides and model hubs: Hoover Flair S2200 Parts, Hoover Flair S2201 Parts, Hoover Flair S2220 Parts
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
