The 7041549 is a genuine OEM Sub-Zero refrigerator control board — the electronic brain of your refrigerator that manages temperature regulation, defrost cycles, and compressor operation. This part has been superseded by 7041362, which is the current active OEM replacement. Stock is limited and sold as final sale. If you need the current active part number, 7041362 is the direct functional replacement for 7041549 and 7006953.

✓ Common Symptoms Fixed

A failed refrigerator control board can cause a wide range of symptoms. This part addresses:

• Refrigerator not cooling or maintaining temperature
• Fridge too warm but freezer still cold
• Defrost system failures — frost buildup, ice accumulation (see guide)
• Compressor won't start or cycles erratically
• Refrigerator not responding to temperature adjustments
• Intermittent cooling or random shutdowns

✓ Key Features & Specifications

• Genuine OEM Sub-Zero control board — exact factory replacement
• Manages temperature control, defrost cycles, and compressor operation
• Direct plug-in replacement — no modifications required
• Part Number: 7041549 | Superseded by: 7041362 | Also Replaces: 7006953
• Sold as final sale — no returns or exchanges

✓ Buying Options

OEM / New (Final Sale): The 7041549 is a genuine Sub-Zero OEM control board. This part number has been superseded by 7041362, which is the current active replacement. Stock is limited. This item is sold as final sale — no returns or exchanges. Please verify your model number before ordering.

✓ Replacement Part Numbers

7041549 | 7006953 | Superseded by: 7041362

✓ Installation Tips

CRITICAL SAFETY WARNING: Always unplug your refrigerator before servicing any electronic components.

1. Unplug refrigerator from wall outlet and allow capacitors to discharge (wait 5 minutes).
2. Locate the control board — typically mounted in the rear upper section or behind an interior panel depending on model.
3. Photograph all wiring harness connections before disconnecting anything.
4. Disconnect all wiring harnesses from the old board carefully.
5. Remove mounting screws and extract the old control board.
6. Install new board in the same orientation and secure with screws.
7. Reconnect all wiring harnesses per your reference photos.
8. Plug in refrigerator and allow 24 hours for temperatures to stabilize before evaluating performance.

Tech Notes: Before replacing the control board, verify the issue is not caused by a failed thermistor, defrost heater, or wiring harness fault — these are cheaper fixes. If the board shows visible burn marks or failed capacitors, replacement is confirmed. Document installation for warranty and troubleshooting purposes.

✓ Frequently Asked Questions

Q: My Sub-Zero refrigerator isn't cooling — is the control board the cause?
A: A failed control board is one of the most common causes of a refrigerator not cooling. However, also check thermistors, the defrost system, and compressor relay before replacing the board, as those are lower-cost fixes.

Q: What's the difference between 7041549, 7041362, and 7006953?
A: 7006953 was the original part number, superseded by 7041549, which was then superseded by 7041362. All three are functionally equivalent — 7041362 is the current active OEM part number.

Q: Is this a final sale item?
A: Yes. Due to the nature of electronic control boards, this item is sold as final sale with no returns or exchanges. Please verify your model number and part number compatibility before ordering.

Q: Do you ship to Canada?
A: Yes — XPart Supply is based in Canada and ships fast across Canada and the US. See our refrigerator not cooling Canada guide for more information.