Menu
Range Hood Not Venting? Fan Motor 603050 – Fix Bertazzoni Ventilation Failure Fast
A failed fan motor is the most common reason a Bertazzoni range hood stops moving air entirely. In most Bertazzoni Master Series ranges, this is caused by a burned-out or seized Motovent S3S7/D1 DFS motor assembly. When it fails, the blower stops spinning — smoke, steam, and cooking odours are no longer exhausted, and the hood runs silently with no airflow at any speed setting. ⚡ Common failure point in Bertazzoni-built range hoods after extended high-heat use. Part 603050 is the genuine OEM replacement motor that restores full ventilation performance and quiet DFS operation immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Range hood powers on — lights and controls respond normally
- ✔ Fan speed selector works but no airflow is produced at any setting
- ✔ Electrical supply to the motor confirmed OK (no tripped breaker)
- ✔ Filters are clean — not a blockage issue
- ✔ ONLY problem is the blower/fan not spinning — no mechanical noise or airflow
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Range hood runs silently — no airflow at any fan speed
- Smoke and steam not being exhausted during cooking
- Fan makes a humming noise but blower doesn't spin
- Burning smell from the hood motor housing
- Fan worked intermittently then stopped completely
- Hood vibrates abnormally or makes grinding noise before failure
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this Motovent fan motor restores full ventilation and quiet operation immediately.
📦 Part Details
- Part Number: 603050
- Type: Range Hood Fan Motor — Motovent S3S7/D1 DFS, 110V 50/60Hz
- Replaces: OEM direct-fit Bertazzoni motor assembly (no modification required)
- Brands: Bertazzoni
- Series: Master Series ranges with S3S7/D1 DFS ventilation system
⚠️ Recommended While Repairing:
While the motor is out, inspect and clean the grease filters and check the capacitor — a failing run capacitor is often what causes the motor to overheat and seize in the first place. Replacing both at the same time prevents a repeat failure within 12 months.
While the motor is out, inspect and clean the grease filters and check the capacitor — a failing run capacitor is often what causes the motor to overheat and seize in the first place. Replacing both at the same time prevents a repeat failure within 12 months.
⚙️ Installation
Skill Level: MODERATE — 30–60 minutes. Disconnect power at the breaker before servicing — do not rely on the hood's power switch alone. Remove the grease filters and motor housing cover to access the Motovent assembly, disconnect the wiring harness, and swap the motor unit. Ensure all wire connectors are fully seated and the motor is secured before reassembling. Run the hood on all speed settings to confirm airflow before closing up.
✓ Compatible Models
Confirmed compatible with Bertazzoni Master Series range hoods equipped with the S3S7/D1 DFS 110V ventilation motor. Contact us to verify your model number before ordering.
💡 Pro Tip
Check the Run Capacitor First:
Before ordering a new motor, test the run capacitor with a multimeter — a failed capacitor causes identical symptoms (fan hums but won't spin) and costs a fraction of the motor. If the capacitor tests good and the motor still won't run, Part 603050 is your fix. Either way, replace the capacitor when you install the new motor to protect your investment.
Before ordering a new motor, test the run capacitor with a multimeter — a failed capacitor causes identical symptoms (fan hums but won't spin) and costs a fraction of the motor. If the capacitor tests good and the motor still won't run, Part 603050 is your fix. Either way, replace the capacitor when you install the new motor to protect your investment.
Part Hubs: 603050 Part Hub, Bertazzoni Range Parts
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
