LIQUI MOLY Cera Tec Engine Oil Additive 300 mL, Part Number 20002

LIQUI MOLY Cera Tec 20002 is a 300 mL ceramic anti-wear additive for most four-stroke gasoline and diesel engines, oil-lubricated manual transmissions, pumps and compressors. The formulation combines microceramic solid lubricant with chemical friction modifiers to reduce friction and wear between lubricated metal surfaces. One 300 mL container is suitable for approximately 3–5 litres of engine oil. The additive is self-mixing and may be added to warm or cold oil.

Is This the Right Product?

This product is selected by lubricant system and application — not by exact vehicle model. Suitable for most compatible four-stroke engines and selected oil-lubricated assemblies. Confirm the lubricant-system requirements before use.

Compatible Applications

• Most gasoline and diesel four-stroke engines
• Turbocharged engines
• Engines with catalytic converters or particulate filters (DPF)
• Oil-lubricated manual transmissions
• Pumps and compressors

Do Not Use In

• Wet-clutch systems (including motorcycles with shared engine/clutch oil)
• DSG or DCT (dual-clutch) transmissions
• Automatic transmissions unless specifically approved by LIQUI MOLY
• Two-stroke engines
• Systems that do not use a compatible lubricating oil

Product Details

Application Instructions

1. Shake the bottle well before use.
2. Add the full 300 mL bottle directly to the engine oil filler port.
3. Best applied at or just after an oil change with fresh oil.
4. The additive is self-mixing — no special mixing required.
5. Check oil level after addition and top up if needed to stay within the safe operating range.

Follow the vehicle manufacturer's lubricant specifications and oil-change intervals. Cera Tec is an additive and does not replace engine oil or routine maintenance. It is a preventive anti-wear additive and does not repair damaged mechanical components.

Application Compatibility

Suitable for most compatible four-stroke gasoline and diesel engines. Safe with DPF, turbochargers, catalytic converters, and fine oil filters. Self-mixing with all commercially available mineral, synthetic, and semi-synthetic motor oils.

Important: Confirm your engine oil capacity before use. One 300 mL bottle is designed for oil systems of approximately 3–5 litres. Do not use in wet clutches, DSG/DCT transmissions, or any application not approved by LIQUI MOLY.