Dryer Not Heating? Thermal Fuse DC47-00016A – Fix Samsung Dryer No Heat Fast

If your Samsung dryer drum spins but produces no heat, the thermal fuse is the most common cause — and DC47-00016A is the part that fixes it. In most Samsung DV-series dryers, this is caused by a failed thermal fuse DC47-00016A. When it blows, the dryer loses all heat output while the drum continues to spin normally, leaving laundry wet after a full cycle. ⚡ Common failure point in Samsung-built DV-series dryers. Part DC47-00016A is the genuine OEM replacement that restores full heat output and gets your dryer back to factory performance.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Dryer powers on and drum spins normally
• ✔ Motor, belt, and door switch function correctly
• ✔ Power supply (240V outlet) confirmed OK
• ✔ ONLY problem is dryer produces no heat or stops heating mid-cycle

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Dryer runs but produces no heat — drum spins, clothes stay wet
• Dryer stops heating mid-cycle and won't resume
• Thermal fuse tests open (no continuity) on a multimeter
• Dryer overheats and shuts off on thermal protection

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this thermal fuse restores normal heat output immediately.

📦 Part Details

• Part Number: DC47-00016A
• Type: Single-Use Thermal Fuse — Safety cutoff rated to open at a specific temperature threshold; cannot be reset once blown
• Replaces: 35001087, WP35001087, PTS-17S, N85, DC47-00016AXP
• Brands: Samsung, compatible with 100+ DV-series dryer models

🛒 Buying Options

OEM / New — The original Samsung DC47-00016A thermal fuse, identical to the factory part. Best when you want an exact factory match.

XPart / New — Premium aftermarket thermal fuse engineered to the same temperature specification as the OEM part. Cost-effective alternative, installs identically. XPart parts are not affiliated with, sponsored by, or endorsed by Samsung.

Universal / New — Compatible thermal fuse fitting a broad range of dryer brands and models including Samsung. Ideal for multi-brand service technicians. Not affiliated with Samsung.

Used variants — Tested used parts available while supplies last. All inspected before listing.

⚙️ Installation

Skill Level: Moderate — 20–40 minutes. Disconnect power before servicing. Remove the dryer's rear panel to access the exhaust duct assembly where the thermal fuse is mounted. Test the existing fuse with a multimeter set to continuity — a blown fuse shows no continuity. Disconnect the two wire terminals, remove the fuse, install the new DC47-00016A, reconnect terminals, reassemble the panel, and restore power to verify heat is restored.

✓ Compatible Models

Also fits: DV219AGW/XAA, DV400GWHDWR/AA, DV40J3000EW/A2, DV40J3000EW/AC, DV42H5000EW/A3, DV42H5000EW/AC, DV42H5200EW/A3, DV42H5200EP/A3, DV45H7000EP/A3, DV45H7000GP/A3, DV45H7000GW/A2, DV45K6200EW/AC, DV45K6200EZ/A3, DV45K6200EZ/AC, DV45K6200GW/A3, DV45K6200GZ/A3, DV45K6500EV/A3, DV45K6500EV/AC, DV45K6500EW/A3, DV45K6500GV/A3, DV45K6500GW/A3, DV45K7600EW/A3, DV45K7600EW/AC, DV45K7600GW/A3, DV48J7700EW/A2, DV48J7700GW/A2, DV48J7770EP/A2, DV48J7770EW/A2, DV48J7770EW/AC, DV48J7770GP/A2, DV48J7770GW/A2, DV50K7500EV/A3, DV50K7500EV/AC, DV50K7500EW/A3, DV50K7500GV/A3, DV50K7500GW/A3, DV50K8600EW/A3, DV50K8600GV/A3, DV50K8600GW/A3, DV52J8700EP/A2, DV52J8700GP/A2, DV52J8700GW/A2, DVE45M5500P/A3, DVE45M5500W/A3, DVE45M5500Z/A3, DVE45N5300V/A3, DVE45N5300W/A3, DVE50M7450P/A3, DVE50M7450W/A3, DVE52M7750V/A3, DVE52M7750W/A3, DVE52M8650V/A3, DVE52M8650W/A3, DVE54M8750V/A3, DVE54M8750W/A3, DVE55M9600V/A3, DVE55M9600W/A3, DVE60M9900V/A3, DVE60M9900W/A3, DVG45M5500W/A3, DVG45M5500Z/A3, DVG45N5300V/A3, DVG45N5300W/A3, DVG50M7450P/A3, DVG50M7450W/A3, DVG52M7750V/A3, DVG52M7750W/A3, DVG52M8650V/A3, DVG52M8650W/A3, DVG54M8750V/A3, DVG54M8750W/A3, DVG55M9600V/A3, DVG55M9600W/A3, DVG60M9900V/A3 and more. Contact us to verify your model number before ordering.

💡 Pro Tip