The EAU36206002 is the OEM LG range oven convection fan AC motor that drives the convection fan blade inside the oven cavity. During convection baking or roasting, this motor circulates hot air evenly throughout the oven to eliminate hot spots and reduce cooking times. When the motor fails, the convection fan stops spinning, resulting in uneven cooking, longer bake times, or the oven defaulting to conventional (non-convection) operation. This part has been discontinued by LG and is no longer available through OEM channels.

✓ Model-Specific Repair Pages

Don't see your model? Contact us — we may be able to source an alternative convection fan motor for your range.

The EAU36206002 AC motor mounts to the rear wall of the oven cavity behind the convection fan blade. It connects to the oven control board via a wiring harness and operates during convection cooking modes. The motor is rated for continuous high-temperature operation inside the oven cavity. As this part is NLA, aftermarket or refurbished alternatives may be available — contact us for current availability.

✓ Common Symptoms Fixed

The EAU36206002 convection fan motor was the OEM solution for the following issues:

• Convection fan not spinning during convection bake or roast modes
• Oven cooking unevenly with hot and cold spots
• Convection mode not working while conventional bake functions normally
• Loud grinding or rattling noise from the rear of the oven cavity
• Fan blade spinning slowly or intermittently

✓ Key Features & Specifications

• OEM LG part number: EAU36206002
• Status: Discontinued — No Longer Available (NLA)
• Type: AC convection fan motor
• Mounts to rear oven cavity wall
• Drives convection fan blade for even heat circulation
• Fits LDG, LRE, LRG, LSE, LSES, LSRE series LG ranges

✓ Buying Options

OEM (EAU36206002): This part is discontinued and no longer available through OEM channels. Contact XPart Supply at our contact page or call 833-899-7278 to discuss available alternatives or refurbished options.

✓ Replacement Part Numbers

No known superseding part number on file. Contact us for current alternatives.

✓ Installation Tips

• Disconnect power to the range before beginning any work.
• Remove the rear oven cavity panel to access the convection fan motor mounting.
• Photograph the wiring harness connector orientation before disconnecting.
• Remove the fan blade retaining nut and pull the blade free from the motor shaft.
• Remove the motor mounting screws and disconnect the harness.
• Install the replacement motor in the same position, reconnect the harness, and reinstall the fan blade.
• Reinstall the rear panel, restore power, and test convection mode.