Oven Not Heating Evenly? Convection Fan Motor EAU61865305 – Fix Convection Failure Fast

If your LG convection range or wall oven is baking unevenly, the convection fan has stopped spinning, or the oven runs but heat is not circulating, the convection fan motor is the most common cause. In LG convection ovens, the fan motor drives the rear convection fan that circulates hot air throughout the oven cavity — when it fails, heat stratifies, baking becomes uneven, and convection mode stops working entirely. ⚡ Common failure point in LG freestanding and slide-in convection ranges. Part EAU61865305 is the genuine OEM replacement motor that restores full convection airflow and even heat distribution immediately upon correct installation.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your oven powers on, the display functions, and the bake element heats normally
• ✔ The oven reaches temperature but heat is uneven — or convection mode produces no airflow
• ✔ Household power supply and outlet are confirmed good
• ✔ The convection fan blade is not obstructed or broken (check before ordering)
• ✔ ONLY problem is the convection fan not spinning or uneven baking in convection mode

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Convection fan not spinning — no airflow heard or felt during convection bake cycle
• Uneven baking — food browns on one side or top/bottom but not throughout
• Oven reaches set temperature but convection mode produces no improvement over bake
• Loud grinding, squealing, or rattling noise from the rear of the oven during convection cycles
• Oven displays F-series error code related to convection fan circuit
• Fan blade spins freely by hand but motor does not run when oven is in convection mode

✔ If these symptoms match, the convection fan motor is the most likely failed component in the system.

✔ In most cases, replacing this motor restores full convection performance immediately.

📦 Part Details

• Part Number: EAU61865305
• Type: Oven convection fan motor — AC motor that drives the rear convection fan blade to circulate hot air throughout the oven cavity during convection bake and roast cycles
• Replaces: OEM direct-fit convection motor — fits all EAU61865305 applications (no modification required)
• Brands: LG

⚙️ Installation

Skill Level: MODERATE — 30–45 minutes. Disconnect power at the breaker or unplug the range before beginning — this repair involves accessing the rear of the oven cavity. Remove the oven racks and rear interior panel to access the convection motor mounted behind the fan blade. Disconnect the motor wiring harness, remove the mounting screws, swap the motor, reinstall the fan blade, and reassemble in reverse order. Ensure the wiring harness connector is fully seated before restoring power.

💡 Pro Tip

Model hub pages: LRGL5823S, LREL6323S, LREL6325F, LRGL5825D, LRGL5825F, LRGL5823D

✓ Model-Specific Repair Pages