LG Washer Hose, inlet / dispenser inlet hose 5214FR4125P

Is This the Right Part?

Common Symptoms

• Detergent or water dispenser does not receive water normally
• Reduced water flow to the dispenser
• Visible cracking, splitting, kinking, or leakage from the hose
• Water leaking inside or around the washer during filling

Check Before Replacing

• Unplug the washer and shut off the water supply before inspecting the hose.
• Inspect the accessible hose routing and connection areas for kinks, cracks, splits, loose connections, or signs of water residue.
• Run a brief fill test only after confirming the hose and connections are secure; observe for leakage around the hose path and dispenser area.
• If the dispenser is not receiving water, verify that the household water supply is on and that the washer inlet screens and inlet valve are not obstructed before identifying this hose as the cause.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the washer water supply before installation.
• Wear work gloves when removing or installing the hose.
• After installation, verify that the hose is routed without kinks and that its connections are secure before restoring water supply.
• Restore water gradually and check for leaks during a fill cycle.

Verified Compatible Models

48842800, 79648842800, 79648852800, F1216FDS, F1216FDS1, WD-10412BD, WD3632HW, WD10210BD, WD10212BD, WD10215BD, WD10410BD, WD12210BD, WD12210RD, WD12410BD, WD12412BD, WD12416BD, WD90210BD, WM0532HW, WM0642HS, WM0642HW, WM0642HW/01, WM0742HGA, WM0742HWA, WM1811CW, WM1832CW, WM2011HW, WM2032HS, WM2032HW, WM2042CW, WM2411HW, WM2442HW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.