LG Washer Leaking? Tub Gasket Seal MDS62058301 – Fix Front Load Leaks Fast
A leaking LG front-load washer is almost always caused by a failed tub gasket seal. In most LG front-load washers, the tub gasket (also called the door boot seal) creates a watertight barrier between the drum and the door glass. When it fails, water escapes onto the floor during every wash cycle — and the problem gets worse with each load. ⚡ Common failure point in LG-built front-load washers across WM3000–WM9500 series. Part MDS62058301 is the genuine OEM replacement that restores a watertight seal and stops leaks immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ QUALIFIER 1 — washer powers on and drum spins normally
- ✔ QUALIFIER 2 — all wash cycles complete without error codes
- ✔ QUALIFIER 3 — water supply hoses and inlet valve confirmed OK
- ✔ ONLY problem is water leaking from the front door area during or after the wash cycle
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Water pooling on the floor in front of the washer during or after a cycle
- Visible cracks, tears, or mold buildup on the door boot seal
- Musty odour from the drum area that won't clear with cleaning
- Door seal feels stiff, brittle, or has lost its flexibility
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this tub gasket seal restores normal leak-free operation immediately.
📦 Part Details
- Part Number: MDS62058301
- Type: Front Load Washer Door Boot / Tub Gasket Seal — OEM LG
- Replaces: 4986ER0004F, 4986ER0004G, MDS62058301
- Brands: LG, Kenmore
While the front panel is open, inspect the door latch assembly and door hinge for wear — these components take stress every time the door is slammed and often fail around the same mileage as the gasket. Replacing them together saves a second labour call.
⚙️ Installation
Skill Level: MODERATE — 45–75 minutes. Disconnect power before servicing. Remove the front panel and door assembly to access the tub gasket retaining ring. Peel the old seal free, clean the drum lip thoroughly, then seat the new gasket and secure the retaining ring before reassembling.
✓ Compatible Models
Confirmed compatible with WM3700HWA, WM4370HVA, WM5000HVA, WM8000HVA, WM9000HVA, WM9500HKA, TCW2013QS2, F1459FDS, LSWF388HVS, WKG101HVA, WKGX201HBA, WSEX200HNA plus additional LG and Kenmore models. Contact us to verify your model number before ordering.
💡 Pro Tip
Any residue, mold, or old sealant left on the drum lip will prevent the new gasket from seating flush — causing a slow leak from day one. Wipe the entire lip with a 50/50 white vinegar and water solution and let it dry completely before pressing the new seal into place. Takes 5 minutes and prevents a callback.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
