Samsung Refrigerator Door Handle Broken or Missing? Door Handle Assembly DA97-13074C – Fix Damaged Fridge Handle Fast

A broken, cracked, or missing refrigerator door handle makes every trip to the fridge a frustration — and on Samsung French door models, the handle is a structural part that takes real daily abuse. In most Samsung French door refrigerators, the door handle assembly is a direct-mount component that attaches to the door panel with hidden screws or snap clips. When it cracks, snaps off at the mounting points, or goes missing entirely, the door becomes difficult or impossible to open cleanly. ⚡ Common failure point on high-use Samsung French door refrigerators. Part DA97-13074C is the genuine OEM Samsung door handle assembly that restores a solid, factory-correct grip and door operation.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Refrigerator powers on and cools normally
• ✔ Door seals and hinges are intact — door opens and closes correctly when handle is held
• ✔ Handle is cracked, broken at the mount points, or missing entirely
• ✔ ONLY problem is the handle itself — not the door panel, hinge, or seal

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Handle cracked or snapped at one or both mounting points
• Handle pulls away from the door when opened
• Handle completely broken off — door difficult to open
• Visible stress fractures or discolouration on the handle body
• Handle wobbles or feels loose even when screws are tight
• Handle missing entirely from a previously repaired or used unit

✔ If these symptoms match, the door handle assembly is the failed component.

✔ In most cases, replacing this handle assembly restores full, solid door operation immediately.

📦 Part Details

• Part Number: DA97-13074C
• Type: Refrigerator Door Handle Assembly
• Replaces: DA97-13074C (OEM — verify earlier revisions by model)
• Brands: Samsung
• Status: ⚠️ Discontinued / No Longer Available (NLA) — used pulls only

⚙️ Installation

Skill Level: EASY — 10–20 minutes. Disconnect power before servicing if removing the door. The DA97-13074C handle typically mounts via screws accessible from inside the door edge or through hidden cap covers on the handle ends. Remove the caps or trim pieces, unscrew the mounting screws, slide the old handle off, position the new handle, reinstall the screws, and replace the caps. Do not overtighten — the mounting bosses on plastic door panels can crack under excess torque.

✓ Compatible Models

Confirmed compatible with RF28HMEDBSR, RF28HFEDTSR, RF28JBEDBSR, RF28K9380SR, RF28K9580SR, RF263BEAESR, RF265BEAESR plus additional Samsung French door refrigerator models. Contact us to verify your model number before ordering.

💡 Pro Tip

✓ Model-Specific Repair Pages