Samsung Dishwasher Sump assembly DD81-02149A, Fixes Water leaking from the lower sump area
Samsung OEM sump assembly for DW3000MM-series dishwashers. The exact part number is identified as DD81-02149A and is listed as an A/S sump assembly.
Samsung OEM sump assembly for DW3000MM-series dishwashers. The exact part number is identified as DD81-02149A and is listed as an A/S sump assembly.
Is This the Right Part?
Common Symptoms
- Visible water or moisture beneath the dishwasher when a leak is traced to the lower sump area.
- A leakage-related alert or error after moisture is detected, if an actual sump-area leak is confirmed.
- Poor wash-water movement or drainage symptoms when the sump area is damaged or obstructed; attached pumps, hoses, and filters must also be ruled out.
Check Before Replacing
- Disconnect power at the circuit breaker before inspecting beneath or inside the dishwasher.
- Check for visible cracking, distortion, or water traces around the lower sump area and its connected components; do not assume the sump is the cause solely from a leak symptom.
- Rule out the water-supply hose, drain-hose connections, door seal, detergent oversudsing, and spray-arm/nozzle obstructions before attributing a leak to the sump.
- With power off, remove and inspect the accessible filter area for debris or obstruction; follow the model’s care instructions and avoid forcing components.
- If replacement is being considered, compare the original part number and the dishwasher model against the parts diagram.
Pro Tip
Part Details
Key Features
- Samsung OEM designation: A/S-Sump; OEM, DW3000MM.
- Lower sump component shown separately from the drain pump, turbidity sensor, thermistor, circulation-pump holder, and water guide in the applicable parts breakdown.
- Interfaces with the dishwasher’s filter/sump area and connected lower water-system components.
Installation Notes
- Disconnect electrical power before service.
- Remove remaining water from the dishwasher before removing the lower sump; the applicable service manual warns that retained water can spill.
- Sump removal requires disconnecting components attached to the sump, including electrical connectors and the drain pump, before the sump is withdrawn.
- Use the model-specific service documentation for reassembly; verify all connections and seals are correctly seated before restoring power or water.
Verified Compatible Models
DW80R2031US/AC, DW80R2031US/AA, DW80R2031UW/AA, DW80R2031UB/AA, DW80R2031UG/AA, DW80CG4021SRAA, DW80CG4051SRAA, DW80N3030UB/AA, DW80N3030US/AA, DW80N3030UW/AA, DW80M2020US/AA, DW80R2031US/AA-00, DW80N3030UB/AA-00, DW80N3030US/AA-00, DW80N3030UW/AA-00
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
