Samsung Dryer Absorber sponge DC72-00032E

Samsung EPDM absorber sponge used in the dryer duct-connector or motor-duct assembly. Samsung service documentation identifies it as EPDM, approximately 3 mm thick, 15 mm wide, and 740 mm long.

Is This the Right Part?

Common Symptoms

• Visible deterioration, compression, tearing, or absence of the duct-connector sponge
• Air leakage or poor fit at the duct-connector area when the original sponge is damaged or missing

Check Before Replacing

• Inspect the duct-connector or motor-duct area for a deteriorated, torn, compressed, or missing EPDM sponge.
• Compare the installed sponge with the documented approximate dimensions and material before ordering.

Pro Tip

Part Details

Key Features

• EPDM material
• Approximately 3 mm thickness
• Approximately 15 mm width
• Approximately 740 mm length
• Black absorber sponge
• Used with Samsung dryer duct or motor-duct assemblies

Installation Notes

• Disconnect electrical power before opening or servicing the dryer.
• Install only after confirming the part location and dimensions against the dryer’s model-specific parts diagram.
• Do not assume that similarly numbered Samsung sponge parts are interchangeable without direct model-specific evidence.

Verified Compatible Models

DV45H7000EW/AC, DV206LEW/XAC, DV218AEW/XAC, DV331AGW/XAA, DV448AEP/XAA-04, DV457EVGSGR/AC, DVE45M5500P, DVE45R6300C/A3, DVE45T6000V/A3, DVE50R8500W/A3, DVE52A5500V/A3, DVE53BB8700TA3, DVE53BB8900TA3, DVE54CG7150DA3, DVE54M8750V/AC, DVG45T6200W/A3, DVG50B5100V/A3, DVG53BB8700VA3, DV42H5200EP/AC03, DV45H7000EW/AC02, DV210AEW/XAA, DV330AEW/XAA-01, DV395ETPASU/A1-00, DV405ETPASU/AA, DV431AEW/XAA-01, DV45H7000EW/A2-02, DV50F9A6EVW/A2-00, DV50K8600EV/A3-01, DV5471AEP/XAA, DV56H9100GG/A2-00, DVE52M7750V/A3-00, DVE54M8750V/A3-00, DVE60M9900V/A3-00, DVG50M7450W/A3-00, DVG55M9600V/A3-00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.