Oven Door Not Sealing or Damaged? Samsung Door Assembly DG94-00901A — Restore Full Door Function Fast

A cracked, broken, or poorly sealing oven door wastes energy, extends cook times, and can be a safety hazard. In Samsung ranges, the door assembly is a common wear item — the outer panel, inner panel, glass, or gasket can fail from heat cycling, impact, or normal use. When the door assembly fails, heat escapes around the door, the oven struggles to hold temperature, and cooking results suffer. ⚡ Common failure point in Samsung-built ranges and slide-in ranges. Part DG94-00901A is the genuine OEM Samsung replacement door assembly that restores a complete, airtight seal and full door function in a single swap.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your Samsung range powers on and the oven heats normally
• ✔ The issue is isolated to the door — cracked glass, broken panel, damaged gasket, or poor seal
• ✔ Heating elements and controls are confirmed working correctly
• ✔ ONLY problem is the door assembly itself — not the thermostat, igniter, or control board

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Oven door glass cracked, shattered, or fogged between panes
• Outer or inner door panel cracked, warped, or damaged
• Door gasket worn, torn, or no longer sealing against the oven cavity
• Heat escaping around the door edges during operation
• Oven taking significantly longer to reach set temperature
• Door handle loose, broken, or detached from the panel

✔ If these symptoms match, the door assembly is the most likely failed component — replacing it addresses all door-related failures at once.

✔ In most cases, installing this OEM door assembly restores normal oven performance immediately.

📦 Part Details

• Part Number: DG94-00901A
• Type: Complete Oven Door Assembly — OEM Samsung
• Includes: Outer door panel, inner door panel, glass panel, and door gasket
• Brand: Samsung
• Condition: Genuine OEM Replacement
• Internal SKU: A1102033G

⚙️ Installation

Skill Level: MODERATE — 20–40 minutes. Disconnect power before servicing. Open the oven door fully, flip the hinge locks on both hinges to the locked position, then lift the door straight up and off the range. Transfer any components from the old door if required, then align the new door assembly onto both hinges simultaneously and flip the locks back to the open position to secure.

✓ Compatible Models

Confirmed compatible with select Samsung range and slide-in range models. Contact us to verify your model number before ordering — we'll confirm fitment at no charge.

💡 Pro Tip