Menu
Your Whirlpool Dishwasher Isn’t Cleaning Properly — W10199699 Spray Arm Is the Fix
✓ Is This the Part You Need?
The W10199699 is the spray arm for Whirlpool, KitchenAid, and Maytag dishwashers — the rotating component that distributes pressurized water across your dishes during the wash cycle. When it cracks, clogs, or breaks at the hub, water pressure drops and dishes come out dirty, spotted, or still greasy after a full cycle. Available as a Genuine OEM Whirlpool part in new and inspected used condition.
⚠️ Check the Spray Arm Bearing & Wash Pump Too: A clogged or cracked spray arm is the most common cause of poor cleaning, but a failing wash pump or blocked filter can produce identical symptoms. If a new spray arm doesn’t resolve the issue, contact our team to help diagnose the next step.
✓ Common Symptoms Fixed
- Dishes not getting clean after a full cycle
- Dishes coming out spotted, greasy, or with food residue
- Spray arm not spinning or rotating during wash
- Weak water pressure inside the dishwasher
- Visible cracks, broken hub, or missing spray nozzles on the arm
- Upper or lower rack dishes consistently dirtier than the other
✓ Part Details
- OEM Part Number: W10199699
- Appliance Type: Dishwasher
- Compatible Brands: Whirlpool, KitchenAid, Maytag
- Component: Spray Arm — distributes wash water across dish racks during cycle
- OEM Option: Genuine Whirlpool W10199699 — meets original equipment specifications
- Used Option: Inspected pull — ideal for budget repairs or older machines, see variant selector
✓ Installation Notes
Skill Level: Easy | Estimated Time: 5–15 minutes. Always disconnect power to the dishwasher before servicing. The spray arm typically snaps or screws onto the wash pump hub at the bottom of the tub — no special tools required. Remove the lower rack, unscrew or unclip the old arm, snap the new one into place, and reinstall the rack. Before replacing, remove and rinse the old arm — clogged spray holes are often the real issue and can be cleared with a toothpick and warm water.
✓ Compatible Models
This spray arm fits a range of Whirlpool, KitchenAid, and Maytag dishwashers. Not sure if this fits your model? Contact us with your full model number and we’ll confirm before you order.
💡 Pro Tip — Clean Before You Replace:
Before ordering a new spray arm, remove the existing one and hold it up to the light — if the spray holes are clogged with mineral deposits or food debris, a 30-minute soak in white vinegar and a toothpick to clear each hole may fully restore water distribution. If the arm is cracked, broken at the hub, or won’t spin freely on its bearing, replacement is the right call. Also run a dishwasher cleaner tablet monthly to prevent future clogging.
Before ordering a new spray arm, remove the existing one and hold it up to the light — if the spray holes are clogged with mineral deposits or food debris, a 30-minute soak in white vinegar and a toothpick to clear each hole may fully restore water distribution. If the arm is cracked, broken at the hub, or won’t spin freely on its bearing, replacement is the right call. Also run a dishwasher cleaner tablet monthly to prevent future clogging.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
