Whirlpool Refrigerator Ice Maker Assembly W11455232, Replaces W11397137

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• No ice production or intermittent ice production
• Ice cubes do not eject from the mold
• Small, hollow, or incomplete cubes when the assembly is not filling correctly
• Water overflowing or leaking from the ice maker area
• Unusual noise during ice-maker operation

Check Before Replacing

• Confirm the refrigerator and ice maker are powered on and the ice-maker shutoff control is enabled.
• Verify the refrigerator water supply valve is open and inspect the supply line for visible kinks or obstruction.
• Check whether the ice mold contains water and whether cubes are obstructing the ejector or shutoff mechanism.
• Observe whether the assembly completes an eject-and-refill cycle; do not force the ejector or manually apply power.
• If cubes are small or hollow, check the refrigerator water filter condition and household water supply before identifying the ice-maker assembly as defective.
• If overflow occurs, verify that the refrigerator and ice-maker area are level and stop the water supply if overflow continues.

Pro Tip

Part Details

Installation Notes

• Disconnect refrigerator power before installation.
• Turn off the refrigerator water supply before disconnecting the ice-maker assembly.
• Use the supplied instructions and confirm exact appliance-model compatibility before installation.
• The replacement may require basic hand tools and some refrigerator disassembly; protect hands from sharp sheet-metal or plastic edges.
• After installation, restore water and power and verify that the assembly fills and ejects normally.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.