Menu
When your JennAir built-in refrigerator has a gap between the doors, cold air escaping at the center mullion, or doors that won’t align properly, the mullion rail assembly is the failed component. In most JennAir JF42-series built-in column refrigerators, this is caused by a cracked, warped, or broken mullion rail assembly. When it fails, the center divider between the refrigerator doors loses its structural integrity — causing door misalignment, cold air leaks at the center seal, compressor overrun, and temperature instability. ⚡ Common structural failure in JennAir JF42-series built-in refrigerators. Part W11590869 is the genuine OEM replacement that restores proper door alignment, a tight center seal, and normal refrigerator efficiency immediately.
This is the correct fix if ALL of the following are true:
Not sure? Send us your model number — we'll confirm before you order.
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this mullion rail assembly restores proper door alignment and a full center seal immediately.
Skill Level: MODERATE — 30–45 minutes. Disconnect power before servicing. Open both refrigerator doors fully and remove any door bins or shelving that may obstruct access to the mullion rail mounting points. Unscrew or unclip the old rail from the cabinet frame, transfer any retained hardware or gasket strips to the new assembly, and reinstall in reverse order. Check door alignment and center gap before restoring power.
Confirmed compatible with JF42NXFXDE01, JF42NXFXDE02 plus additional JennAir JF42 series models. Contact us to verify your model number before ordering.
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.