GE Monogram Oven Rack Guide WG02A01866 — Restores Rack Glide Function
WG02A01866 is a genuine GE Monogram oven rack guide. This listing is a used, inspected unit pulled from a working appliance.
The rack guide mounts to the interior oven cavity wall and supports the oven rack, allowing it to slide in and out smoothly at the correct height.
Replace the guide when the original is cracked, broken, warped, or when the rack no longer slides smoothly or sits level in the oven.
Confirm the complete oven model and rack guide position before ordering. Left-hand and right-hand guides are typically separate parts with different part numbers — confirm which side requires replacement.
❓ Is This the Right Part?
This is the correct part if ALL of the following are true:
- ✔ Your oven model is confirmed compatible with WG02A01866
- ✔ The rack guide position (left or right, and height level) matches the original
- ✔ The original guide is cracked, broken, or preventing smooth rack operation
Not sure? Send us your model number and the rack position — we'll confirm before you order.
🔧 Common Reasons to Replace
- Oven rack does not slide smoothly or catches when pulling out
- Rack sits unevenly or tilts to one side during use
- Rack guide is cracked, chipped, or broken at the mounting points
- Guide has separated from the oven cavity wall
📦 Part Details
- Part Number: WG02A01866
- Type: Oven rack guide / rack support rail
- Brand: GE Monogram
- Condition: Used / Certified Pre-Owned — inspected before listing
- Note: Confirm model, rack position and side (left or right) before ordering. Oven rack guides are position-specific and are not universally interchangeable between models or rack heights.
If one rack guide is cracked or broken, inspect the opposite side at the same time. Guides on the same rack level experience identical stress and often fail within a short time of each other. Replacing both sides in one repair avoids a second disassembly and keeps the rack level and stable.
⚙️ Installation
Skill Level: EASY. No tools required in most cases. Allow the oven to cool completely before reaching into the cavity. Remove the oven rack, unclip or unscrew the original guide from the cavity wall, and snap or screw the replacement into the same position. Reinstall the rack and confirm it slides smoothly and sits level before use.
✓ Compatible Models
Compatible model information for WG02A01866 is not yet verified in our system. Contact us with your model number to confirm fitment before ordering.
💡 Pro Tip
When the rack guide is removed, inspect the oven rack for bent wires, warped frame rails, or damaged glide tabs. A warped rack will continue to slide unevenly even after the guide is replaced. If the rack is bent or the glide tabs are worn, replace the rack at the same time to get a smooth, level result.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
