GE / General Electric Dishwasher switch interlock assembly WG04F01066, Replaces WD06X10002

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher may stop during a cycle if door-interlock contact is intermittent.
• Dishwasher may operate only when the door is held or closed firmly if the interlock is not reliably being actuated.

Check Before Replacing

• Disconnect electrical power before inspecting the door-area components.
• Check that the door closes fully and that the latch engages the strike without obvious obstruction or damage.
• With power disconnected, inspect the interlock's wiring connections for loose, damaged, or corroded terminals.
• If qualified to use a meter and following the model's service information, check whether the switch changes continuity when its actuator is engaged; this check alone does not rule out a latch, wiring, or control issue.

Pro Tip

Part Details

Installation Notes

• Disconnect power to the dishwasher before servicing the door/interlock area.
• Document wire positions or connector orientation before disconnecting the existing interlock.
• Handle the wiring terminals and switch actuator carefully; do not force connectors.
• After installation, verify that the door and latch engage normally before restoring power and testing operation.

Verified Compatible Models

GSC4508G00WW, GSD4800J01BB, GSD5130D03WW, GSD5211J00BB, GSD5211P00WW, GSD5411J01SB, GSD5420G00WW, GSD5500G00WW, GLV1426P00WW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.