If your GE front-load washer is leaking water from the door, has visible mold or mildew growing in the door seal folds, or has a torn, cracked, or deformed gasket, the door boot gasket needs to be replaced. Part number WG04F11940 is the OEM door boot gasket for the GE GFW650 and GFW850 front-load washer series — the large rubber bellows seal that creates a watertight barrier between the door glass and the drum opening. A damaged or deteriorated gasket allows water to escape during the wash cycle and creates a breeding ground for mold and mildew that can affect your laundry and indoor air quality.

✓ Model-Specific Repair Pages

No GE front-load washer model hub pages are available yet for this part. Contact us with your model number and we'll confirm compatibility before you order.

The WG04F11940 door boot gasket is a large molded rubber bellows that seals the gap between the front panel drum opening and the door glass on your GE front-load washer. It flexes with drum movement during the spin cycle while maintaining a continuous watertight seal. Over time, the rubber can tear from sharp objects in pockets, crack from detergent residue buildup, or develop permanent mold contamination that cannot be cleaned. This is a genuine OEM replacement manufactured to GE's original specifications for precise fit and long-term sealing performance.

✓ Common Symptoms Fixed

• Water leaking from the front of the washer during or after a cycle
• Visible tears, cracks, holes, or deformation in the door seal
• Mold or mildew growing inside the gasket folds that cannot be removed
• Musty or mildew smell coming from the washer
• Water pooling on the floor in front of the washer
• Door not sealing properly or feeling loose when closed

✓ Key Features & Specifications

• OEM part number: WG04F11940
• Replaces: 0020301320
• Compatible brand: GE, General Electric
• Appliance type: Front-load washer
• Component: Door boot gasket / door bellows seal
• Shipping weight: 25 lbs
• Country of origin: Canada

✓ Buying Options

OEM / New — Genuine GE original equipment manufacturer door boot gasket. Identical to the factory-installed rubber bellows seal. Meets all original dimensional and material specifications. Best choice for a guaranteed factory-spec replacement that restores a watertight seal on your GE front-load washer.

✓ Replacement Part Numbers

WG04F11940 (OEM) | 0020301320

✓ Installation Tips

• Unplug the washer before beginning any repair work
• The door boot gasket is held in place by a spring clamp at the front and secured to the drum opening at the rear
• Remove the front panel or access panel to reach the rear clamp — procedure varies by model
• Release the front spring clamp first using a flathead screwdriver, then work the gasket lip off the drum opening flange
• Note the drain holes at the bottom of the gasket — the new WG04F11940 must be oriented the same way
• Seat the rear lip of the new gasket onto the drum opening flange first, then work the front lip over the front panel opening
• Reinstall the spring clamp, reassemble panels, restore power, and run a test cycle to confirm no leaks
• Due to the 25 lb shipping weight, having a helper for handling is recommended

✓ Compatible Models

WG04F11940 is compatible with the following GE front-load washer models: GFW650SPN0SN, GFW650SPN1SN, GFW650SPN2SN, GFW650SPN3SN, GFW650SPN4SN, GFW850SPN0RS, GFW850SPN1RS, GFW850SPN2RS, GFW850SPN3RS, GFW850SPN4RS.

✓ Frequently Asked Questions

Is WG04F11940 the same as 0020301320?
Yes — WG04F11940 is the current OEM part number. 0020301320 is an alternate reference number for the same door boot gasket application.

Can I clean mold out of my washer door gasket instead of replacing it?
Surface mold can sometimes be cleaned with a bleach solution or washer cleaner. However, if mold has penetrated deep into the rubber folds, or if the gasket is torn or cracked, replacement is the only reliable solution. A damaged gasket will continue to harbor mold and leak regardless of cleaning. Contact us if you need help assessing your gasket.

How do I prevent mold from coming back after replacing the gasket?
After every wash cycle, wipe the gasket folds dry and leave the door ajar to allow airflow. Run a monthly washer cleaning cycle with a washer cleaner tablet. Avoid using excess detergent, which leaves residue that feeds mold growth.

How long does installation take?
This is a moderately involved repair that typically takes 60–90 minutes. Some models require removing the front panel for full access. Basic hand tools are required.

Will this gasket fit my GFW850 as well as my GFW650?
Yes — WG04F11940 is confirmed compatible with both the GFW650 and GFW850 series. See the Compatible Models section above for the full list of supported model numbers.