Whirlpool Refrigerator Freezer Door Gasket W10600741

⚠️ NLA Notice: W10600741 has been discontinued by Whirlpool and is no longer available new from the manufacturer. Used and inspected units may be available — select the Used variant if shown. Confirm the complete refrigerator model and gasket dimensions before ordering any used unit.

The Whirlpool W10600741 Freezer Door Gasket is the magnetic door seal that runs around the perimeter of the freezer compartment door. It compresses against the refrigerator cabinet when the door closes, creating an airtight seal that maintains freezer temperature and prevents warm air from entering.

A failed or damaged gasket may contribute to a warm freezer, excessive frost buildup, condensation around the door frame or a door that does not hold closed securely. Similar symptoms can also result from a damaged door hinge, a warped door, a failed door switch or a refrigerant or sealed-system problem. Inspect the gasket and door alignment before ordering.

Is This the Right Part?

Confirm the complete refrigerator model number before ordering. Freezer door gaskets are model-specific — similar-looking gaskets may differ in perimeter dimensions, corner radius, magnetic strip strength and mounting method.

Common Symptoms

• Freezer compartment warmer than normal or not maintaining set temperature
• Excessive frost or ice buildup on the freezer walls or evaporator
• Condensation or moisture around the freezer door frame
• Freezer door does not hold closed or swings open on its own
• Visible tears, cracks, stiffness or gaps in the door gasket

Check Before Replacing

• Inspect the gasket for visible tears, cracks, compression failure or gaps — a gasket that looks intact may still be failing if it no longer seals against the cabinet
• Test the seal by closing the door on a piece of paper — if the paper slides out easily at any point around the perimeter, the gasket is not sealing correctly
• Check the door hinges and alignment — a sagging or misaligned door prevents even a good gasket from sealing correctly
• Verify the refrigerator is level — an unlevel refrigerator causes the door to hang open slightly and allows warm air to enter regardless of gasket condition

Part Details

Installation Notes

1. Disconnect electrical power before servicing the refrigerator door.
2. Photograph the existing gasket mounting method and corner positions before removal.
3. Compare the used gasket with the original — verify perimeter dimensions, corner radius and mounting-strip profile.
4. Warm the new gasket in warm water if it is stiff from storage to help it conform to the door frame.
5. Work around the perimeter evenly when seating the gasket to avoid gaps at the corners.
6. Test the seal with a piece of paper at multiple points around the perimeter before returning the refrigerator to service.

Use a qualified technician when diagnosis or installation is outside your experience.

Verified Compatible Models

Confirm your complete Whirlpool refrigerator model number before ordering. Contact us to verify compatibility before ordering a used unit.

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering. This part is NLA — only used units may be available.