OVEN DOES NOT HEAT PROPERLY ON THE BAKE SETTING
Whirlpool Range oven bake element / lower bake element WP9750417, Fixes Oven does not heat properly on the Bake setting
Whirlpool genuine OEM lower bake element for electric ranges. Documented specifications are approximately 20-1/2 inches wide, 15-1/4 inches long, 2-1/4-inch inserts, and 1100/2500 watts at 250 volts. The part is documented as no longer available from the manufacturer.
Part WP9750417Replaces 9750417Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWP9750417
Replaces9750417
ManufacturerWhirlpool
Appliance TypeRange
Part TypeRange oven bake element / lower bake element
✅ Cross Reference Information
Current Part NumberWP9750417
Verified Previous OEM Numbers9750417
Common Symptoms
- Little or no heat during baking
- Oven takes unusually long to preheat
- Uneven baking caused by insufficient lower-oven heat
- Bake element does not glow or shows a visible break, blister, burn mark, or crack
Check Before Replacing
- Disconnect electrical power at the range breaker before inspecting the element.
- With power disconnected and the oven cool, visually inspect the lower bake element for a break, blistering, burn marks, or cracking.
- Observe whether the element heats during a Bake cycle; do not touch the element or work inside the oven while energized.
- If visual inspection is inconclusive, have a qualified person perform a de-energized continuity/resistance check; Whirlpool technical documentation gives a typical bake-element resistance range of approximately 10–40 ohms for applicable models.
Pro Tip
A bake element can fail internally without obvious visible damage, so a visual inspection alone may not identify every failure.
Part Details
Part NumberWP9750417
Part TypeRange oven bake element / lower bake element
ManufacturerWhirlpool
Appliance TypeRange
Primary FunctionLower oven bake element that converts electrical energy into heat for baking and roasting.
Installation Notes
- Disconnect power at the range breaker and allow the oven to cool before service.
- Confirm the replacement element matches the appliance model and the original element's shape, terminals, and mounting arrangement before installation.
- Avoid pulling forcefully on the element or its wire terminals; support the wiring while disconnecting the old element.
- After installation, restore power and test the Bake function while observing from a safe distance for normal heating.
Verified Compatible Models
Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
