Whirlpool Dishwasher Pump and Motor Assembly WPW10510667, Replaces W10349483

Genuine Whirlpool dishwasher circulation pump and motor assembly that circulates wash water through the spray arms.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher fills with water but does not circulate it through the spray arms
• Poor or ineffective washing
• Circulation motor does not run
• Leaking water may occur when the pump assembly fails

Check Before Replacing

• After filling, listen for the circulation motor and check whether water is spraying from the arms.
• If safely accessible, verify that the motor receives approximately 120 VAC during the circulation portion of the cycle; electrical testing should be performed only by a qualified person.
• Inspect for visible leakage around the circulation-pump area after disconnecting power and removing standing water.

Pro Tip

Part Details

Key Features

• Single-phase synchronized wash motor
• 120 volts, 60 Hz
• 37 watts operating power
• 45 watts maximum power rating
• Circulation pump and motor assembly

Installation Notes

• Disconnect electrical power before servicing or installing the part.
• Follow the appliance-specific service documentation for access, removal, and reconnection.
• Inspect for water leakage after installation before returning the dishwasher to normal use.

Verified Compatible Models

66513099N410, 66513542N412, 66514522N610, 66514579N610, 66514742N512, WDF560SAFB0, WDF560SAFB1, WDF560SAFB2, WDF560SAFM0, WDF560SAFM1, WDF560SAFM2, WDF560SAFT1, WDF560SAFW0, WDF560SAFW1, WDF560SAFW2, 7WDT770PAYM0, 7WDT770PAYM1, 7WDT770PAYM2, 7WDT770PAYM3, 7WDT770PAYM4, 7WDT770PAYW0, 7WDT770PAYW1, 7WDT770PAYW2, 7WDT770PAYW3, 7WDT770PAYW4, 7WDT790SAYM0, 7WDT790SAYM2, 7WDT950SAYM0, 7WDT950SAYM1, 7WDT950SAYM2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.