Refrigerator Handle Broken or Pulling Away? Handle Kit WR01A02513 – Fix Door Handle Failure Fast

A broken, cracked, or loose refrigerator door handle is one of the most common cosmetic and functional failures on GE French-door and bottom-mount refrigerators. In GE, Profile, and related series refrigerators, the stainless steel door handles take daily stress from opening and closing and are a known wear point. When a handle cracks, pulls away from the door, or goes missing entirely, the door becomes difficult to open and the kitchen appearance suffers. ⚡ Common wear item on GE French-door and bottom-mount refrigerators. Part WR01A02513 is the genuine OEM stainless steel handle kit that restores factory fit, finish, and full door operability for both the fresh food and freezer compartments.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Refrigerator is a GE GNE, PFE, PNE, PFF, GWE, PWO, PWR, PYE, PYF, DFE, or INF series model
• ✔ Your freezer handle pin-to-pin center measurement is NOT 25.5"
• ✔ Handle is cracked, broken, loose, or missing on the fresh food or freezer door
• ✔ You have or can source 2 screws WR01A01801 (sold separately — required for installation)
• ✔ ONLY problem is a damaged or missing door handle — refrigerator otherwise functions normally

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

• Refrigerator door handle cracked, broken, or snapped off — most common reason for replacement
• Handle pulling away from the door at one or both mounting points
• Handle loose or wobbling when the door is opened
• Missing handle making the door difficult or impossible to open normally
• Cosmetic damage — scratches, discoloration, or corrosion on the stainless finish
• Freezer door handle damaged separately from the fresh food handle

✔ If these symptoms match, this is the correct replacement kit to restore both door handles.

✔ In most cases, installing this handle kit restores full door operability and factory appearance immediately.

📦 Part Details

• Part Number: WR01A02513
• Type: Refrigerator Door Handle Kit – Stainless Steel (fresh food + freezer handles)
• Replaces: OEM direct-fit handle kit — supersedes 294D3298G002 (no modification required)
• Brands: GE, GE Profile
• Note: Requires 2 screws WR01A01801 (sold separately — not included in this kit)

⚙️ Installation Notes

Skill Level: EASY — 10–15 minutes, no special tools required. No need to unplug the refrigerator for this repair. Open the refrigerator door and locate the handle mounting screws on the interior door edge. Remove the old handle screws and pull the handle free from the door. Position the new handle over the mounting holes and thread in the WR01A01801 screws by hand first, then tighten firmly. Do not overtighten — stainless steel handles can crack at the mounting boss if over-torqued. Repeat for the freezer door handle.

💡 Pro Tip

Find parts for your refrigerator model: GNE25DYRLKFS, GNE25JYKHFFS, PFE24HMLTKES, PFE24HYRMKFS, PFF25LYRBCFS, PFF25LYRCCFS, PNE25NMLTKES, PNE25NYRDKFS, PNF25FYRBCFS, PNF25FYRCCFS, PNQ25IMPCCES, PWO19JSRCFFS, PWR19JSRCFFS, PYE18HMLTKES, PYE18HYRMKFS, PYF19JYRCFFS, DFE24JYRDKFS, INF25FYRBCFS, GWE19JYLGFFS, GWE19JMLXFES

✓ Model-Specific Repair Pages