Refrigerator Not Staying Cold? Freezer Door Gasket WR14X40076 – Fix Seal Failure Fast

A worn or torn freezer door gasket is one of the most overlooked causes of rising energy bills and inconsistent refrigerator temperatures. In most GE and GE Profile French-door and bottom-freezer refrigerators, a failed door gasket allows warm air to infiltrate the freezer compartment continuously. When it fails, the compressor overworks, frost builds up unevenly, and food in both compartments suffers. ⚡ Common wear item in GE French-door and bottom-freezer models. Part WR14X40076 is the genuine OEM black freezer door gasket that restores an airtight seal and brings energy efficiency back to spec.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Refrigerator powers on and compressor runs normally
• ✔ Freezer temperature control and evaporator fan are functioning
• ✔ No error codes related to the sealed system or control board
• ✔ You can feel warm air or see condensation around the freezer door edge
• ✔ ONLY problem is a poor door seal — gasket is cracked, stiff, torn, or no longer grips the cabinet

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Freezer not maintaining temperature — most common complaint
• Frost or ice buildup around the freezer door frame or inside the compartment
• Condensation or moisture on the outside of the freezer door
• Refrigerator running constantly or compressor cycling more than usual
• Visible cracks, tears, gaps, or hardening in the door gasket rubber
• Dollar-bill test fails — paper slides out easily when door is closed

✔ If these symptoms match, this is the most likely failed component causing temperature and efficiency issues.

✔ In most cases, replacing this door gasket restores an airtight seal and normal compressor cycling immediately.

📦 Part Details

• Part Number: WR14X40076
• Type: Freezer Door Gasket Assembly – Black
• Replaces: OEM direct-fit door gasket — supersedes WR14X25030, WR01L10671, WR01L14242 (no modification required)
• Brands: GE, GE Profile, GE Cafe

⚙️ Installation

Skill Level: EASY — 20–30 minutes. No need to unplug the refrigerator for this repair. Starting at one corner, peel the old gasket out of the door liner groove by hand — no tools required for removal. Press the new gasket into the groove starting at the top corners and working around the perimeter, ensuring the retaining lip seats fully in the channel. If the gasket is stiff from shipping, soak it in warm water for 5–10 minutes before installation to improve flexibility and seating.

💡 Pro Tip

Find parts for your refrigerator model: GFE24JGKAFBB, GNE25JSKAFSS, GYE18JSLAFSS, GWE19JSLAFSS, GDE25ESKARSS, XNE25JSKBFSS, CNE25SSKAKSS, CWE19SP4NNW2, GFE24JBLGFTS, GYE18JBLGFTS

✓ Model-Specific Repair Pages