GE Monogram Range Oven Main Control Board WS01F10713 – OEM Replacement (Replaces 295D4392G030)
GE Monogram Range Oven Main Control Board WS01F10713 – OEM Replacement (Replaces 295D4392G030)
GE Monogram Range Oven Main Control Board WS01F10713 – OEM Replacement (Replaces 295D4392G030)
GE Monogram Range Oven Main Control Board WS01F10713 – OEM Replacement (Replaces 295D4392G030)

GE Monogram Range Oven Main Control Board WS01F10713 – OEM Replacement (Replaces 295D4392G030)

Price
$196.68

Frequently Bought Together

Stock Notification

Get notified when this product is available again

⚠ THIS PART HAS BEEN DISCONTINUED BY THE MANUFACTURER AND IS NO LONGER AVAILABLE.
IT WAS SUBBED FROM 295D4392G030.
Genuine OEM – Final Stock – No Longer Available

GE Monogram Range Oven Main Control Board WS01F10713 – OEM Replacement (Replaces 295D4392G030)

Part# WS01F10713 Replaces 295D4392G030 Fits GE Monogram Free Shipping

GE Monogram Range Oven Not Heating or Controls Unresponsive? Main Control Board WS01F10713 – Fix Oven Control Failure Fast

If your GE Monogram range oven is not heating, the controls are unresponsive, or the oven displays error codes and shuts down unexpectedly, the main control board is the most common failed component. In most GE Monogram professional gas ranges, the main control board manages all oven functions — temperature regulation, ignition sequencing, burner control, and the display interface. When it fails, the oven may not heat at all, display error codes, lose temperature accuracy, or become completely unresponsive to input. ⚡ High-value repair on GE Monogram ZGP366 professional gas range platforms. Part WS01F10713 is the genuine OEM replacement control board that restores full oven function immediately — and with this part discontinued by GE, this is your last opportunity to source it new.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

  • ✔ Range has power — display shows something or error code is present
  • ✔ Gas supply confirmed on and igniter sparks normally on surface burners
  • ✔ Temperature sensor (RTD probe) confirmed functional — not an open or shorted sensor
  • ✔ Wiring harness and connectors to the board confirmed intact with no burn marks
  • ✔ ONLY problem is oven not heating, unresponsive controls, error codes, or erratic temperature behavior

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

  • Oven not heating — surface burners work but oven won’t ignite or maintain temperature
  • Control panel unresponsive — buttons or knobs have no effect
  • Error code displayed on the oven panel (F-codes or E-codes)
  • Oven temperature erratic — overshoots or undershoots set temperature significantly
  • Oven shuts off mid-cook without user input
  • Display blank or flickering even with power confirmed at the unit

✔ If these symptoms match, the main control board is the most likely failed component in the system.

✔ In most cases, replacing the main control board restores full oven function immediately.

📦 Part Details

  • Part Number: WS01F10713
  • Type: Range oven main control board (PCB) — primary electronic control assembly for oven temperature, ignition, and display functions
  • Replaces: 295D4392G030 (no modification required)
  • Brands: GE Monogram
  • Status: Discontinued OEM — final warehouse stock, no returns or exchanges, free shipping included
⚠️ Test the Temperature Sensor Before Replacing the Board:
A failed oven temperature sensor (RTD probe) produces identical symptoms to a failed control board — oven won’t heat or temperature is erratic. Test the sensor resistance at room temperature (should read approximately 1080Ω for most GE sensors) before ordering the board. If the sensor tests open or shorted, replace the sensor first — it’s a fraction of the cost.

⚙️ Installation

Skill Level: Moderate — 30–45 minutes. Disconnect power at the breaker before beginning — do not rely on the range power switch alone. The control board is typically accessed by removing the rear panel or the control panel fascia depending on the model. Photograph all wiring harness connections before disconnecting, then transfer connectors to the new board one at a time to avoid mis-wiring. Restore power and run a test cycle to confirm correct temperature regulation and display function.

✓ Compatible Models

Confirmed compatible with ZGP366NT1SS, plus additional GE Monogram ZGP366 series models. Contact us to verify your model number before ordering.

💡 Pro Tip

This Is the Last New OEM Board Available — Order Now If You Need It:
WS01F10713 is discontinued by GE and no longer in production. Once this remaining stock sells through, the only options will be used pulls or third-party rebuilds — neither of which carry the reliability of a new OEM board. If your ZGP366 range is worth keeping, this is the repair to make now while new stock is still available.

✓ Model-Specific Repair Pages

✅Compatibility & Cross Reference

Part number WS01F10713 replaces 295D4392G030


ZGP366NT1SS, ZGP366NT1SS

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions