Bosch Washer Drain pump 00145753, Replaces 00144977, 00144844

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Standing water remains after the drain or spin cycle
• Drain cycle is unusually slow
• Drain pump may run but little or no water is discharged
• Washer may stop with a drain-related fault when drainage is obstructed or the pump is not operating

Check Before Replacing

• Disconnect electrical power before inspecting the pump area.
• Check and clean the washer drain filter or pump-access area for coins, lint, or other foreign objects, following the appliance owner's manual.
• Inspect the external drain hose for kinks, crushing, or blockage.
• During a drain cycle, observe whether water exits the drain hose and listen for pump operation; these observations do not by themselves confirm pump failure.
• If the pump area is accessible, check that the pump cover is fully seated and secured as specified by the appliance documentation.

Pro Tip

Part Details

Installation Notes

• Verify the complete washer E-Nr. before installation.
• Disconnect power and address residual water safely before opening the pump area.
• Confirm whether damping-bushing and screw set 00425075 is required, because Bosch states that this pump is supplied without that set.
• Follow the appliance-specific Bosch service or repair instructions for access, hose connections, electrical connections, and secure mounting; do not force connections or operate the washer until all covers and connections are secure.

Verified Compatible Models

WAP24200UC/05, WAP24200UC/11, WAP24201UC/05, WAP24201UC/11, WAP24202UC/14, WAS20160UC/01, WAS20160UC/16, WAS20160UC/18, WAS20160UC/20, WAS20160UC/23, WAS20160UC/28, WAS20160UC/33, WAS20160UC/38, WAS24460UC/01, WAS24460UC/16

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.