Alliance Laundry Systems / Speed Queen Washer drain pump assembly 205217P, Replaces 201566P, 200937P

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water remains in the washer after the drain portion of the cycle.
• Unusual or loud noise during draining.
• Water leakage near the pump area.
• Burning smell or overheating associated with a mechanically obstructed or failing pump.

Check Before Replacing

• Disconnect electrical power before inspecting the pump area, hoses, or connections.
• Check the external drain hose for kinks, blockage, or improper placement before condemning the pump.
• If the washer design and service documentation permit access, inspect the pump inlet, outlet hoses, and impeller area for foreign objects or clothing obstructions; be prepared for residual water.
• During a drain cycle, observe whether water flow is restricted and whether the pump produces abnormal noise or leaks. These observations do not by themselves confirm pump failure.

Pro Tip

Part Details

Installation Notes

• Disconnect the washer from electrical power before service.
• Shut off water supplies and manage residual water before disconnecting pump hoses, where applicable to the washer service procedure.
• Match hose routing, electrical connections, and pump orientation to the original assembly and the applicable washer service manual.
• After installation, verify that all hose and mounting connections are secure and check for leaks during a drain test.
• Use the appliance-specific service documentation because access and removal steps vary by washer design.

Verified Compatible Models

SWT820WN, SWT210QA, SWT321QA, SWT321LM, SWT2B0QN1124, SWT120WA, SWT020WM, SWT210QN, SWT210QM1124, SWT220LN1124

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.