Frigidaire / Electrolux Gas range surface burner control knob, white 316220008

Is This the Right Part?

Common Symptoms

• Knob is cracked, broken, missing, or visibly worn.
• Knob spins or slips without properly turning the valve stem.
• Burner cannot be selected or turned on/off through the knob.
• Burner setting does not adjust from low to high as expected.

Check Before Replacing

• With the appliance cool and the burner control in OFF, inspect the knob for cracks, distortion, missing sections, or visible wear.
• Gently turn the knob through its normal range and observe whether it engages the valve stem without slipping; do not force it.
• If the knob is removed, inspect the knob opening and the exposed valve stem for obvious damage or mismatch.
• Confirm that the burner-control problem is isolated to the knob before replacing it; a damaged valve, ignition, or gas-control component can produce similar symptoms.

Pro Tip

Part Details

Installation Notes

• Turn the control knob to OFF before removal or installation.
• Pull the old knob straight off the valve stem; do not force or pry against the control panel.
• Align the replacement knob with the valve stem and press it into place in the OFF position.
• After installation, confirm that the knob is seated and turns the valve normally; verify burner operation safely according to the appliance owner's instructions.

Verified Compatible Models

CFGF337ESE, CFGF337GSA, CFGF337GSB, CFGF337GSD, CFGF337GSE, CFGF337GSF, CFGF366FSE, CFGF368GSA, CFGF368GSB, CFGF368GSC, CFGF368GSD, CFGF368GSE, CFGF368GSF, CFGF368GSG, CFGFL79GSD

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.