LG Dryer Drum Support Roller Assembly 4581EL2002H, Replaces 4581EL2002E

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Loud thumping, rumbling, or squealing
• Drum not rotating smoothly or seizing
• Flat spots or visible wear on roller
• Dryer vibrates excessively
• Roller seized or not turning
• Drum falls out of alignment

Check Before Replacing

• With the dryer disconnected from power, inspect the roller for visible wear, pressing, distortion, or damage.
• If the dryer produces roller noise during operation, inspect the drum support roller before replacing other components.
• Compare the installed roller assembly and shaft with the replacement part before installation.

Pro Tip

Part Details

Installation Notes

• CRITICAL SAFETY WARNING:
• Unplug dryer and turn off gas (if applicable) before repair.
• Unplug dryer
• from wall outlet and disconnect gas (if gas model).
• Remove dryer top and front panels
• to access drum (may require removing control panel first).
• Remove drum belt
• from motor pulley and tensioner.
• Lift drum out
• to expose roller assemblies.
• Remove mounting nut or clip
• securing old roller to shaft.
• Slide old roller off shaft
• ; inspect shaft for wear or debris—clean as needed.
• Install new roller assembly
• onto shaft; add washer or clip as required.
• Spin roller by hand
• to check for smooth, quiet operation.
• Repeat for all rollers being replaced.
• Reinstall drum, belt, and panels
• in reverse order.
• Plug in dryer
• and run a test cycle to verify quiet, smooth operation.
• Safety Notes:
• Replace all rollers at once for best results. Lubricate shaft lightly with high-temp dryer lubricant if specified.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.