Frigidaire Dishwasher Circulation pump predecessor/replaced number A00210627 5304514365

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher fills but won’t wash / weak spray pressure
• Dishes come out dirty due to low circulation
• Loud grinding/whining/humming from sump area during wash
• Pump not running (no wash action)
• Stops mid-cycle during wash portion (motor overheating/seizing)
• Leaks at pump seal/gasket area (platform dependent)

Pro Tip

Part Details

Installation Notes

• CRITICAL SAFETY WARNING:
• Turn off breaker and water supply. Expect water spillage.
• Turn off power at the breaker.
• Shut off water supply to the dishwasher.
• Remove toe-kick panel(s).
• Disconnect drain hose and water supply line as needed; place towels/pan.
• Pull dishwasher out and carefully lay it on its back (recommended for access on many Frigidaire platforms).
• Disconnect wiring connector(s) from the circulation pump motor.
• Release hose clamps and remove hoses from the pump ports (mark positions).
• Remove retaining clips/locking ring or mounting screws (platform dependent) and remove the pump assembly from the sump.
• Install the new
• 5304514365
• pump: seat gasket/O-ring properly and secure fully.
• Reconnect hoses/clamps and wiring connectors.
• Restore water and power, run a test cycle, verify strong spray, and check for leaks.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.