Alliance Laundry Systems / Speed Queen Washer Drain Pump Assembly 805724P, Replaces 805724, 803921P, 803921

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer stops with water remaining in the tub
• Drain portion of the cycle is incomplete
• Pump hums or runs without moving water
• Unusual pump noise during draining
• Water leakage from the pump or connected hoses

Check Before Replacing

• Disconnect electrical power before inspection.
• Check the washer drain hose and accessible pump inlet area for kinks, restrictions, or foreign objects.
• Inspect the pump wiring connector and nearby hoses for loose connections, damage, or signs of leakage.
• If the pump is commanded on according to the washer’s service procedure, observe whether it runs and whether water moves; do not assume the pump is defective until hose restrictions and wiring are checked.
• Confirm that the replacement pump’s voltage and frequency ratings match the washer requirements.

Pro Tip

Part Details

Installation Notes

• Disconnect power before beginning service and follow the washer’s model-specific service instructions.
• Turn off water supplies and manage any residual water before disconnecting pump hoses.
• Transfer or reconnect hoses and electrical connectors to the replacement assembly only after comparing their routing and orientation with the original.
• Inspect hose connections and sealing surfaces during reassembly; replace damaged related components rather than forcing a leaking connection.
• After installation, run an appropriate drain or service test and check for proper water removal and leaks.

Verified Compatible Models

AFN50RSP113FW01, AFN50RSP113TW01, AFN50RSP115TW01, AFN50RSP115TW13, AFNE9BSP113FN01, AFNE9BSP113TN01, AFNE9BSP113TW01, AFNE9BSP115TN13, AFNE9BSP115TW01, AFNE9BSP115TW13, AFNE9BSP123DN04, AFNE9BSP123DW04, AFNE9RSP113TW01, AFNE9RSP115TW01, AFNE9RSP115TW13

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.