W11188327 Washer Lid Latch
W11188327 Washer Lid Latch

Whirlpool Washer Lid Lock Assembly W11188327, Replaces W10727693

XPart Number XP10009311
$143
$208
Available by special order
Buying Options: OEM Genuine

Choose an available buying option.
Check Fit & Find Parts
Bubba checks verified models, product descriptions, cross-references and store data. Find your model number →

Frequently Bought Together
WASHER WILL NOT START OR ADVANCE BECAUSE THE LID DOES NOT LOCK OR IS NOT DETECTED AS LOCKED

Whirlpool Washer Lid Lock Assembly W11188327, Fixes Washer will not start or advance because the lid does not lock or is not detected as locked

Genuine Whirlpool washer lid lock assembly. It locks the washer lid during operation to prevent opening during wash and spin cycles.

Part W11188327Replaces W10727693Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.

Is This the Right Part?

Part NumberW11188327
ReplacesW10727693
ManufacturerWhirlpool
Appliance TypeWasher
Part TypeWasher Lid Lock Assembly

✅ Cross Reference Information

Current Part NumberW11188327
ReplacesW10727693

Common Symptoms

  • Lid or door will not close or latch
  • Lid-lock indicator flashes or a lid-lock-related error appears
  • Washer will not start a cycle
  • Washer will not agitate or spin because the lid-lock safety interlock is not satisfied
  • Lid remains locked or fails to release normally

Check Before Replacing

  • Disconnect power before inspecting the lock assembly, wiring, or connector.
  • Confirm the lid closes fully and that clothing, packaging material, or other objects are not interfering with the lock striker.
  • Inspect the lock and striker area for detergent, lint, or spill buildup; clean external surfaces with a soft, damp cloth and mild soap if needed.
  • Check that the striker is not visibly damaged, displaced, or misaligned with the lock opening.
  • If the washer still reports a lid-lock fault, follow the exact model’s service documentation for any unplugged continuity or resistance checks; do not bypass the safety interlock.

Pro Tip

A flashing lid-lock light does not prove that the lock assembly itself has failed: first check lid closure, striker alignment, and debris, then use the appliance’s model-specific diagnostic procedure.

Part Details

Part NumberW11188327
Part TypeWasher Lid Lock Assembly
ManufacturerWhirlpool
Appliance TypeWasher
Primary FunctionSecures and electrically verifies the washer lid is closed and locked during operating portions of the wash cycle, helping prevent mid-cycle lid opening.

Installation Notes

  • Disconnect electrical power before beginning the repair.
  • Verify the complete washer model number and compare the replacement assembly’s connector, mounting points, and physical layout with the original before installation.
  • Photograph or label wiring and connector routing before disconnecting the old assembly.
  • Install and secure the assembly according to the washer’s model-specific service literature; do not force the connector or mounting points.
  • After installation, run the model-appropriate lid-lock or service test and confirm normal locking and unlocking before regular use.

Verified Compatible Models

7MMVWB955FC0, 7MMVWB955FC1, 11031632610, 11031632611, 11031632612, 11031633610, 11031633611, 11031633612, 11031642020, 11031643020, MVWB955FC0, MVWB955FC1, MVWB955FW0, MVWB955FW1, MVWB965HC0, MVWB965HW0, WTW9500EC0, WTW9500EW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.

What Customers Say

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps