NO WATER DISPENSING OR ICE PRODUCTION CAUSED BY RESTRICTED, STUCK, OR LEAKING VALVE OPERATION
Whirlpool Refrigerator Water Inlet Valve W11312191, Fixes No water dispensing or ice production caused by restricted, stuck, or leaking valve operation
Genuine Whirlpool OEM water inlet valve that controls water flow to the refrigerator ice maker and water dispenser.
Part W11312191Replaces W11095287Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberW11312191
ReplacesW11095287
ManufacturerWhirlpool
Appliance TypeRefrigerator
Part TypeRefrigerator Water Inlet Valve
✅ Cross Reference Information
Current Part NumberW11312191
ReplacesW11095287
Common Symptoms
- Water dispenser does not dispense water
- Ice maker does not fill or produce ice
- Water leaks into the ice maker or refrigerator
- Ice maker overfills because the valve does not shut off fully
- Slow or restricted water flow when the supply pressure and tubing are adequate
Check Before Replacing
- Confirm the refrigerator’s water supply shutoff valve is fully open.
- Inspect the refrigerator water line for kinks, crushing, or visible blockage.
- Inspect the inlet screen or filter area for visible debris or mineral buildup without damaging or removing the screen.
- Check household water pressure; the valve requires adequate pressure to shut off properly, with RepairClinic specifying a minimum of 20 psi.
- If checking coil resistance, use the appliance service documentation or the rating marked on the valve; do not treat a resistance reading alone as definitive proof of failure.
- After any water-line inspection, check the valve and connections for leaks.
Pro Tip
If the ice maker is overflowing, first verify that water pressure is at least 20 psi and that the valve is not being held open by a supply or control issue; low pressure can prevent the valve from closing fully.
Part Details
Part NumberW11312191
Part TypeRefrigerator Water Inlet Valve
ManufacturerWhirlpool
Appliance TypeRefrigerator
Primary FunctionControls and regulates water flow to the refrigerator’s ice maker and water dispenser.
Installation Notes
- Disconnect electrical power and shut off the refrigerator water supply before servicing.
- Remove the existing valve and transfer or reconnect the water and electrical connections only as shown in the appliance-specific service documentation.
- Secure the replacement valve in the original mounting location; do not alter tubing routing or connectors.
- Restore the water supply gradually and inspect all valve connections for leaks before returning the refrigerator to normal operation.
- Verify the replacement against the refrigerator model and the original valve connections before installation.
Verified Compatible Models
JFFCC72EFP00, JFFCC72EFP02, JFFCC72EFS00, JFFCC72EFS02, JFFCC72EFS03, JFFCC72EFS04, KRFC704FBS00, KRFC704FBS01, KRFC704FBS02, KRFC704FBS03, KRFC704FPS00, KRFC704FPS01, KRFC704FPS03, KRFC704FPS04, KRFC804GBS00
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
