Whirlpool Washer Tub-to-Pump Hose 461971409193

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible water leak underneath or near the washer drain pump
• Water remaining in the tub when the hose is split, torn, or obstructed
• Slow or incomplete draining when the hose is restricted or damaged

Check Before Replacing

• Disconnect electrical power before accessing the hose or pump area.
• Visually inspect the tub-to-pump hose for splits, tears, collapsed sections, loose connections, or signs of leakage.
• Check for an obstruction in the hose and confirm that the hose is routed without kinks.
• Inspect the hose connections and existing clamps for secure attachment.
• If the hose appears intact, check the pump and other drain-path components before identifying the hose as the cause.

Pro Tip

Part Details

Installation Notes

• Disconnect power before servicing the washer.
• Access the hose and pump area according to the washer model’s service documentation.
• Release the existing hose clamps and remove the old tub-to-pump hose; Whirlpool service documentation identifies hose-clamp removal as part of this service operation.
• Install the replacement hose in the original routing and secure it with the appropriate existing clamps.
• After reassembly, run an appropriate drain or test operation while checking the hose connections for leaks.

Verified Compatible Models

WFW3090GW0, WFW3090GW2, WFW3090JW0, WFW3090JW1, WFW5090GW0, WFW5090GW2, WFW5090JW0, WFW5090JW1, WFW3090GW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.