DISHWASHER WILL NOT START OR MAY STOP DURING A CYCLE
GE Dishwasher Configured Service Machine Control Board WG04F12716, Fixes Dishwasher will not start or may stop during a cycle
GE configured service machine control board used in compatible GE dishwashers. The exact requested OEM number WG04F12716 is documented as replaced by GE OEM part WD21X32163.
Part WG04F12716GE
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWG04F12716
ManufacturerGE
Appliance TypeDishwasher
Part TypeConfigured Service Machine Control Board
Common Symptoms
- Dishwasher controls may be unresponsive or the unit may appear not to start.
- Wash cycles may stop unexpectedly or fail to complete.
- Dishwasher may not drain, fill, wash, or dry when the control board is not operating correctly.
- Lights or controls may flash or behave erratically when control-board communication or processing fails.
Check Before Replacing
- Confirm the dishwasher has power at the household breaker and that the breaker has not tripped.
- With power disconnected, inspect the machine-control-board wiring harnesses and connectors for looseness, corrosion, or visible damage.
- Check the dishwasher’s service or diagnostic indicator only according to the model-specific technical sheet; do not perform live-voltage testing unless qualified to do so.
- Before condemning the machine control board, verify that the user-interface board, door wiring, and power supply are not causing the same symptom.
Pro Tip
A replacement configured control board may not resolve a no-start or intermittent-control symptom if the user-interface board, door harness, or board-to-board wiring is also faulty.
Part Details
Part NumberWG04F12716
Part TypeConfigured Service Machine Control Board
ManufacturerGE
Appliance TypeDishwasher
Primary FunctionControls and coordinates the dishwasher’s wash-cycle sequencing and operation of connected functions such as filling, washing, draining, and drying.
Installation Notes
- Disconnect electrical power to the dishwasher at the breaker before accessing or replacing the control board.
- Access location and panel-removal steps vary by dishwasher model; follow the model-specific service instructions.
- Transfer wiring connectors one at a time or document their locations before removal, and ensure each connector is fully seated during installation.
- Inspect the harnesses and connectors for damage before installing the replacement board.
- Restore power only after all panels and electrical connections are secured, then verify operation using the appliance’s model-specific test procedure.
Verified Compatible Models
CDT706P2M5S1, DDT595SBL5TS, DDT595SFL5DS, DDT595SGJ5BB, DDT595SGJ5WW, DDT595SMJ5ES, DDT595SSJ5SS, GDF570SGJ5BB, GDF570SGJ5CC, GDF570SGJ5WW, GDF570SSJ5SS, GDF650SFJ5DS, GDF650SGJ5BB, GDF650SGJ5WW, GDF650SMJ5ES
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
